Each Armored cable contains high strength, good bending performance, no gel, easy to be connected and operated on with buffer design, independent strength member and sheath to prevent damage from environmental and mechanical stress. Outer jacket’s colors varies according to the types of optical fibers (indoor use), black color is recommended for outdoor use, options for other colors available upon request.
10mm x 4Core Armoured Cable Coleman
Suitable for under and over-ground usage alike, 6mm 4 Core Armoured Cable is a dust and waterproof variant of electrical cable that is commonly found within powered networks and supplying mains electricity to a large variety of devices, both domestic and industrial.
This particular type of cable is constructed using Plain Annealed Stranded Copper for the conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing and Steel Wire for the armouring.
Not only does the Steel Wire Armour provide a method of mechanical protection, meaning it is suitable for installation into highly-corrosive environments, the armour also provides a form of CPC (Circuit Protective Conductor) meaning it can be used as an earth for the cable. This means that an earth core/cable is not required although it is still recommended as an extra safety measure.
No. of cores / size of cable – 4
Approx overall diameter – 18.7mm
Approx weight (m) – 0.75Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating – 600/1000Vt
₦23,750.00
CompareBased on 0 reviews
Be the first to review “10mm x 4Core Armoured Cable Coleman”
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
95mm x 4 Core Armoured Cable (Coleman)
95mm 4 Core Armoured Cable is a variant of steel wire armoured cable used for industrial electrical applications as well as being suitable for direct burial to carry mains electricity to various powered devices. It is also commonly found within powered networks such as within power stations and factories, etc.
This cable is commonly identified by the following construction; plain annealed stranded copper for the cores/conductors, polyvinyl chloride for the bedding and sheathing, cross-linked polyethylene for the insulation, with a steel wire armour protecting the layers beneath.
Although this cable is suitable for powering smaller, more domestic installations such as powering an outdoor shed or house as well as garden/water features, it is most commonly found within more industrial practices, as mentioned previously.
No. of cores / size of cable – 4
Approx overall diameter – 40.6mm
Approx weight (m) – 5.39Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel Wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Primarily used in large industrial power networks, powering multiple devices at once.SKU: coleman95mm -
SURGE PROTECTOR
Sollatek MultiGuard – MG1 -13 Amp – 4
MG1 Multi-socket extension (4 outlets) wire having the capability of protecting the equipment connected to it against a power surge of up to 4500amp
MG1 is robust and ideal for home use and office usage. It has no on-off switch buttonSKU: 5060037800092 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 1.6 – 2.5amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload3 -
HIGH BAY LIGHTS
HiClean LED High Bay Light HB04-200W
i. Beam angle: 90 & 120 degrees
ii. Intelligent light system for your industrial, Sports or Assembly areas
iii. Green, energy savings, long and reliable life of 100,000 hours
iv. No RF interference, No IR/UV radiation, no mercury pollution
v. Wide color availability in degrees Kelvin(K), 3000, 4000, 5000K
vi. Superior Uniformity; Superior Temperature Stability
vii. Temperature tested for the toughest conditions
viii. Environmental friendly, energy savings (to 90%),
ix. Special circuit design, each LED work separately, avoiding the single broken
x. LED influence problem
xi. Control options – Occupancy/DALI, 1-10V Dimming, Wireless,
and Daylight Sensor
xii. DLC Listed, UL, SAA, CE, ENEC, GS, SASO, DMark, EMC, ROHS Approved
xiii. This high bay is suitable for fresh and frozen meat processing plants,
fruit and vegetable processing and canning facilities.
xiv. Equal to 400-600W HID
xv. Luminous Flux – 19,500lmSKU: luceco high bay2
There are no reviews yet.