Each Armored cable contains high strength, good bending performance, no gel, easy to be connected and operated on with buffer design, independent strength member and sheath to prevent damage from environmental and mechanical stress. Outer jacket’s colors varies according to the types of optical fibers (indoor use), black color is recommended for outdoor use, options for other colors available upon request.
10mm x 4Core Armoured Cable (Nigerchin WIRE AND CABLE)
10mm 4 Core Armoured Cable is a large variant of electrical cable used to supply mains voltage electricity to various devices and powered networks. Weatherproof and dust-proof, this cable is suitable for underground installation as well as being attached to structures or buildings using Cable Cleats. It is commonly found in a range of installations including;
– The Railway and Transport industry
– Underneath roads powering buildings
– Industrial networks such as power plants and factories
– Within cable ducting in the roofs of warehouses
The Cable is constructed from the following materials; Plain Annealed Stranded Copper for the conductors/cores, cross-linked polyethylene (XLPE) for the insulation, Steel Wire for the Armour and PVC (Polyvinyl Chloride) for the bedding and sheathing.
No. of cores / size of cable – 4
Approx overall diameter – 21.1mm
Approx weight (m) – 0.98Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: – 600/1000Vt
₦11,536.00
CompareBased on 0 reviews
Be the first to review “10mm x 4Core Armoured Cable (Nigerchin WIRE AND CABLE)”
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL, Electro
35mm 4Core Amroured Cable|Per Meter (Nigerchin Cable and Wire)
ARMOURED CABLE, ELECTRICAL INDUSTRIAL, Electro35mm 4Core Amroured Cable|Per Meter (Nigerchin Cable and Wire)
35mm 4 Core Armoured Cable is a variant of electrical cable that is commonly found within powered networks as well as supplying mains voltage to multiple powered devices etc. It is used in a wide variety of electrical applications but at this size, it is commonly found within industrial compounds such as power stations and building sites.
This cable is identified by the following method of construction;
– Plain Annealed Stranded Copper for the cores/conductors
– XLPE (Cross-Linked Polyethylene) for the insulation
– PVC (Polyvinyl Chloride) for the sheathing and bedding
– Steel Wire for the armouring that protects the insulating layers beneath.
As well as a form of mechanical protection, therefore suitable for outdoor use and underground installations, the steel wire armour also acts a CPC (Circuit Protective Conductor), meaning it acts as a natural earth for the cable therefore an earth core or seperate length of earth cable is not required.
– No. of cores / size of cable – 4
– Approx overall diameter – 28.8mm
– Approx weight (m) – 2.3Kg
– Conductors – Plain Annealed Stranded Copper
– Insulation – Cross-Linked Polyethylene
– Bedding – Polyvinyl Chloride
– Armour / Protection – Steel Wire
– Sheath / Jacket – Polyvinyl Chloride
– Application – Used within large powered networks & for providing mains electricity to multiple powered devices.
– Voltage Rating – 600/1000VtSKU: 35mmnigerchin -
-
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 7 – 10amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload4 -
Electro, GEAR SWITCHES, GEAR SWITCHES & CHANGEOVER
MEM – Eaton 600A TPN Gear Switch
The top and bottom endplates are removable. Door can be removed for ease of installation. Incorporate knockouts and gasketed doors, IP41 rated protection. Handle: chromium-plated handles with ON (I) / OFF (O) indication. The switch can be locked ON or OFF by means of a padlock. Internal fixing: enables the unit to be mounted side by side with other units. Maximum current: 600A Number of Poles: 3 Poles. 3 Phase. Switches: quick make-and-break type, suitable for use on AC or DOC. Removable moving contact assemblies: to facilitate wiring. Interiors comprise porcelain bases fitted with non-ferrous conducting components.
SKU: MEM600
There are no reviews yet.