Each Armored cable contains high strength, good bending performance, no gel, easy to be connected and operated on with buffer design, independent strength member and sheath to prevent damage from environmental and mechanical stress. Outer jacket’s colors varies according to the types of optical fibers (indoor use), black color is recommended for outdoor use, options for other colors available upon request.
16mm x 4 Core Amroured Cable (Nigerchin WIRE AND CABLE)
16mm 4 Core Armoured Cable is a variant of electrical cable that has a cross-sectional diameter of 16mm as well as a Live and Neutral core within the cable itself.
The construction of this cable is commonly identified by the plain annealed stranded copper used for the conductors/cores, cross-linked polyethylene (XLPE) for the insulation, PVC (Polyvinyl Chloride) for both the bedding and sheathing and steel wire for the armour protecting the insulating layers beneath.
The steel wire armour also provides a form of mechanical protection, which means that it has higher pulling loads making it suitable for being dispensed from large cable drums. As well as providing mechnical protection, it also ensures that the cable can withstand highly corrosive environments such as being installed underground as well as being attached to outdoor walls and structures using Cable Cleats.
16mm 4 Core Armoured Cable is found in a wide range of industries across the globe. Some examples of the most common ones are:-
– The transport industry
– Railway industry
– Underneath roads carrying mains electricity to buildings
– Cable Ducting within warehouses.
No. of cores / size of cable – 4
Approx overall diameter – 23.6mm
Approx weight (m) – 1.3Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: 600/1000
₦19,223.00
CompareBased on 0 reviews
Be the first to review “16mm x 4 Core Amroured Cable (Nigerchin WIRE AND CABLE)”
-
ACCESSORIES, PRINTERS
CANON SCAN LiDE 120
For certain products, a driver is necessary to enable the connection between your product and a computer. On this tab, you will find the applicable drivers for your product or in the absence of any drivers, an explanation of your product’s compatibility with each operating system.
SKU: Canon120 -
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
100Amp Knife Switch
Type A, single-throw and double-throw, non-fusible knife switches have a corrosion resistant finish, are mounted on GPO-3 bases and have high clips and hinges. The high clips and hinges simplify the front-of-board connections. Available 30 Amp thru 2000 Amp.
Fusible Type A knife switches are arranged with fuse holders which will accept standard code fuses. When mounted on a panel the single-throw switch is fusible at the bottom. Available 30 Amp through 600 Amp at 250, 480 or 600 volt.SKU: 781 -
ELECTRICAL INDUSTRIAL, TRANSFORMER
ABB Transformer 300KVA 33/400KV
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: 300KV
- Typical fluid: mineral oil
SKU: DTS30033
There are no reviews yet.