Each Armored cable contains high strength, good bending performance, no gel, easy to be connected and operated on with buffer design, independent strength member and sheath to prevent damage from environmental and mechanical stress. Outer jacket’s colors varies according to the types of optical fibers (indoor use), black color is recommended for outdoor use, options for other colors available upon request.
185mm x 4Core Armoured Cable (Nigerchin Cable and Wire)/Per meter
185mm 4 Core Armoured Cable is a size and type of steel wire armoured cable. Primarily found in large powered networks and underneath roadways supplying mains electricity to large buildings. It can also be found within the transport industry, specifically railways powering the trains and buildings located beside the tracks. Due to the size of this cable, it is perfectly suitable for large amounts of power running through it on a daily basis, 24 hours a day.
The best solution to this issue would be to buy a length of earth cable that matches the length of the Armoured Cable. This would negate the steel wire from being used as an earth, meaning it is a safer alternative.
185mm 4 Core Armoured Cable is constructed from the following materials;
– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
– Voltage Rating – 600/1000Vt
₦138,000.00
CompareBased on 0 reviews
Be the first to review “185mm x 4Core Armoured Cable (Nigerchin Cable and Wire)/Per meter”
-
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Havells 12 Way 100A Three Phase(TPN) Distribution Board C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroHavells 12 Way 100A Three Phase(TPN) Distribution Board C/W MCB
Features
Compact DBs which occupy minimum space
Raised neutral link for easy wiring
Suitable for surface & fush mounting
Detachable din bar with end stoppers for easy assembly of breakers
Supplied with fully shielded bus-bars
Level marks for providing indication for fitment in wall
Supplied with neutral & earth link, top & bottom detachable plates
Supplied with masking sheet to protect components from cement during plasteringSKU: 271 -
CATRIDGE AND INKS
HP 93A Black Original LaserJet Toner Cartridge (CZ192A)
Overview
Original HP 93 LaserJet Toner Cartridges deliver professional-quality business documents. Stay productive by avoiding wasted time and supplies. These reliable cartridges are specifically designed for your HP LaserJet Pro MFP.
Features
Get the quality you expect, time after time, from Original HP Toner Cartridges. Avoid the reprints, wasted supplies and costly delays that can occur with remanufactured cartridges.Keep your business moving forward. Trust Original HP Toner Cartridges for consistent, uninterrupted printing that keeps you on track and on budget.
Don’t miss a beat. Replace Original HP Toner Cartridges in seconds and go back to printing. They’re specifically designed for your HP LaserJet Pro MFP – with the toner and imaging drum in one easy-to-install supply.
Help conserve resources. Recycle your Original HP Toner Cartridges – it’s easy and free with the HP Planet Partners programme, available in more than 50 countries and territories worldwide.2
Specifications
Color(s) of printing supplies
Black
Print technology
Laser
Page yield (black and white)
12,000 pagesSKU: HP93A -
MOTOR STARTER
Three Phase Motor Starter 12-18A
General Description:
Motor starter are suitable for 50Hz or 60Hz, rated voltage up to 660V, current up to 95A circuit. In order to protect motor starting, accelerating the motor to rated rev, against overload operation and artificially breaking the circuit of protected motor.
Structure Feature:
1. Sealed: Plastic box LE1-D09~D32 and iron box platstic coated LE1-D40~D95, protection up to IP65;
2. Operation system with manual “START” and “STOP” buttons. With thermal overload relay consisting a inversable starter;
3. Install different accessories derive many kinds of other products;
4. Select LC1-D contactor with standard 35mm rail, which can be fixed directly at the base of starter. Wires extracted from the three phase of the thermal overload relay can be inserted the three phase main contacts of the contactor, easy assembly and connection.SKU: 1498
There are no reviews yet.