Single Phase (SPN) 4, 6, 8 & 12Ways, MCB Protected Socket: Single Pole SPN, 10Amp, 15Amp, 20Amp, 32Amp, 40Amp, 50Amp, 63Amp, 80Amp, 100Amp.
6way Single Phase Eaton-MEM Consumer Unit Distribution Board C/W MCb
Features These are most elegantly designed DBs, to suit the decor of homes Raised neutral link for easy wiring Spring loaded outer cover swings open by just pressing the lock as in case of Elegance series. Supplied with masking sheet to protect components from cement during plastering Supplied with neutral & earth link, top & bottom detachable plates
₦128,600.00
CompareBased on 0 reviews
Be the first to review “6way Single Phase Eaton-MEM Consumer Unit Distribution Board C/W MCb”
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
6mm x 4 Core S.W.A/P.V.C Armoured Cable (Nigerchin WIRE AND CABLE)
ARMOURED CABLE, ELECTRICAL INDUSTRIAL6mm x 4 Core S.W.A/P.V.C Armoured Cable (Nigerchin WIRE AND CABLE)
NIGERCHIN was incorporated in 1970 as the pioneer manufacturer of electric cables and conductors in Nigeria.
A partnership with Canada Wire and Cable International (CWI), then, a Canadian company with over 75 years experience in cable designed, engineering and manufacture, gave Nigerchin relevant technology, experience and facilities for product and manpower development.
Over time, Nigerchin has built on this foundation, competency for upgrading, producing and certifying quality products that meet international requirements in the electrical power industry and installations.
4mm 4 Core Armoured Cable is a form of electrical cable that has the ability to supply mains electrical power to devices and networks. The cable also has more domestic uses such as being used to supply mains electricity to devices such as outdoor buildings, for example, garden sheds or out-houses, as well as being suitable for outdoor lighting circuits such as patio and decking lights.
The cable construction is identified by plain annealed stranded copper being used for the conductors/cores, PVC (Polyvinyl Chloride) being used for the bedding and sheathing, cross-linked polyethylene being used for the insulation and steel wire being used for the armour.
Due to the steel wire armour that is within the cable protecting the insulating layers beneath, it is also used to give the cable higher pulling loads, meaning it can take the strain of being dispensed from cable drums when delivered to a building/construction site etc. The steel wire armour can also be used as a CPC (Circuit Protective Conductor) or ‘natural earth’ meaning that the armour itself will earth the cable.
No. of cores / size of cable – 6
Approx overall diameter – 16.4mm
Approx weight (m) – 0.54Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: 600/1000VtSKU: 6mm nigeerchin -
Electro, HALOGEN, LIGHT BULBS, LIGHTING
Metal halide lamps 1000watt – Osram
Product benefits
– Output of up to 2,000 W
– High efficiency
– E40 screw base for simple lamp handling
– Long lifetime
– UV values significantly below the maximum permitted thresholds to IEC 61167 thanks to UV filterAreas of application
– Factories and workshops
– Sports halls and multi-purpose halls
– Industrial installations
– Airports
– Docks and port facilities
– Marshaling yards, container transshipment facilities
– Approved only for use in enclosed luminaires
– Outdoor applications only in suitable luminairesSKU: MH1000w -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 2.3-4amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload2
There are no reviews yet.