Weight | 2 kg |
---|
ABB 200KVA 11/400KV Distribution Transformer
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
₦18,793,191.88
CompareBased on 0 reviews
Be the first to review “ABB 200KVA 11/400KV Distribution Transformer”
-
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Havells 12 Way 100A Single Phase Consumer Units Distribution Board C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroHavells 12 Way 100A Single Phase Consumer Units Distribution Board C/W MCB
Features
These are most elegantly designed DBs, to suit the decor of homes
Raised neutral link for easy wiring
Spring loaded outer cover swings open by just pressing the lock as in case of Elegance series.
Supplied with masking sheet to protect components from cement during plastering
Supplied with neutral & earth link, top & bottom detachable platesSKU: 270 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 7 – 10amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload4 -
FLUORESCENT FITTINGS
Philip Fluorescent Choke – Philips
Electro-magnetic Ballasts for TL-D Fluorescent Lamps
– Equipped with screw contacts
– Reliable electrical and mechanical performance
– Optimum lamp performance under optimum temperature conditionsSpecification:
Lamp Type : Four-foot T8 lamp
Power Output : 36 – 40 W
Input Voltage : 220 – 240 V/AC
Frequency : 50 Hz
SKU: Ballast1 -
Electro, SOCKETS & SWITCHES, SWITCHES
Legrand CLIPSAL SWITCH 1 GANG – 30Amps
Key Features:
1 gang
Rockers are a long throw momentary action type
C-bus learn enabled
LED button indicators provide illumination and status feedback
Night light feature
Fall back level option to dim indicators at a set time after the last button press
Mounted using standard mounting accessoriesSKU: 1436
There are no reviews yet.