Weight | 2 kg |
---|
ABB 200KVA 11/400KV Distribution Transformer
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
₦18,793,191.88
CompareBased on 0 reviews
Be the first to review “ABB 200KVA 11/400KV Distribution Transformer”
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
50mm x 4Core Armoured Cable (Kablemetal Nexans Nigeria)
50mm 4 Core Armoured Cable is a large and specific size of Armoured Cable, primarily found within large powered networks whilst also carrying power to a range of different powered devices. Although this cable can be used for domestic uses such as powering outdoor sheds and greenhouses as well as water features and outdoor lights, due to its size, it is commonly found within more industrial installations such as power stations and large construction sites.
The cable is constructed itself from the following; Plain Annealed Stranded Copper for the cores/conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing & steel wire for the armour protecting the layers beneath.
The steel wire armour within the cable also provides a mechanical protection, therefore it enables the cable higher pulling loads, which is useful for when the cable is being dispensed from a large drum.
No. of cores / size of cable – 4
Approx overall diameter – 31.3mm
Approx weight (m) – 2.95Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Used primarily within large powered networks supplying mains electricity to multiple devices.
Voltage Rating: 600/1000VtSKU: 1520 -
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGS, FLUORESENT TUBES, INDOOR LIGHTS, LIGHT BULBS, LIGHTING
Havell Explosion Proof Corrosion Proof Fluorescent Lamp 4ft Double (LED type)
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGS, FLUORESENT TUBES, INDOOR LIGHTS, LIGHT BULBS, LIGHTINGHavell Explosion Proof Corrosion Proof Fluorescent Lamp 4ft Double (LED type)
Widely used for the illumination of various marine platforms, chemical tankers, LNG ships and hazardous cargo wharf etc.
Can reliably work in severe environment exposed to moisture, vibration or corrosion;
Explosive hazardous atmosphere Zone 1, Zone 2, Zone 21 and Zone 22
Explosion -proof electronic ballast, wide voltage input
SKU: Explosion Proof Corrosion Proof-1-1-1-1 -
CIRCUIT BREAKERS, DISTRIBUTION BOARDS, Electro
ABB Contactor A16-30-10 600V 50Hz
A16 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V AC or 220 V DC. The contactors can also be used for many other applications such as isolation, capacitor switching, lighting. The A… series 1-stack 3-pole contactors are of the block type design.
SKU: ABB2
There are no reviews yet.