BB’s change-over and transfer switches are designed to transfer loads from one power source to another in a wide variety of applications. The range includes switches from 16 to 3200 Amperes, which can be operated manually, remotely by using a motor or automatically. The most compact solution With an advanced and compact design, ABB’s change-over and transfer switches can be installed in confined spaces Superior performance: ABB’s change-over and transfer switches are tested according to IEC 60947-6-1 and IEC 60947-3 standards. The switches have ratings in AC31 and AC33 utilization categories, up to 415 V. In motorized switches, the motor operators have a wide voltage operation range Suitable for your application Safe operation: Service continuity is ensured with a number of built-in, integrated safety features. For instance, the change-over mechanism has stable positions shown reliably. Unwanted manual and remote operation can be prevented. Manual operation is always possible in emergency situations.
ABB Gear Switch 400A TPN
With ABB’s change-over switches, people and equipment are safe
Easy and flexible installation
Depending on the size, the switch can be mounted in different positions, on the panel door or DIN rail. Snap-on accessories and connections are available.
• IP65 rated (not suitable for external installation) Steel Enclosure
• Powder coated textured finish (RAL 7035)
• All switches are supplied with fuses and removable gland plates
• All 3 pole switches include detachable neutral link (OT160 solid link)
• Hinged lid complete with lock
• Switch Fuses are internally rated IP20 on incoming terminals up to 63A
• Pad lockable pistol grip handle as standard • Switch Fuses 100A are supplied with incoming terminal shrouds not fitted to allow customer connections
₦550,000.00
CompareBased on 0 reviews
Be the first to review “ABB Gear Switch 400A TPN”
-
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Powertec 4 Way 100A Single Phase Consumer Units DB C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroPowertec 4 Way 100A Single Phase Consumer Units DB C/W MCB
Features
These are most elegantly designed DBs, to suit the decor of homes
Raised neutral link for easy wiring
Spring loaded outer cover swings open by just pressing the lock as in case of Elegance series.
Supplied with masking sheet to protect components from cement during plastering
Supplied with neutral & earth link, top & bottom detachable plates.SKU: 278 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 7 – 10amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload4 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
70mm x 4Core Amroured Cable (Kablemetal Nexans Nigeria)
70mm 4 Core Armoured Cable is a size and type of steel wire armoured cable. Primarily found in large powered networks and underneath roadways supplying mains electricity to large buildings. It can also be found within the transport industry, specifically railways powering the trains and buildings located beside the tracks. Due to the size of this cable, it is perfectly suitable for large amounts of power running through it on a daily basis, 24 hours a day.
The best solution to this issue would be to buy a length of earth cable that matches the length of the Armoured Cable. This would negate the steel wire from being used as an earth, meaning it is a safer alternative.
70mm 4 Core Armoured Cable is constructed from the following materials;
– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
No. of cores / size of cable – 4
Approx overall diameter – 36.8mm
Approx weight (m) – 4.23Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel Wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Primarily found in large powered networks as well as buried underneath roads supplying mains electricity to large buildings etc.
Voltage Rating – 600/1000VtSKU: 1521 -
There are no reviews yet.