ABB Transformer 300KVA 11/400KV
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: 300KV
- Typical fluid: mineral oil
₦19,912,723.63
Compare-
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Eaton-MEM 6way Three Phase(TPN) Distribution Board C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroEaton-MEM 6way Three Phase(TPN) Distribution Board C/W MCB
0 out of 5(0)Features Compact DBs which occupy minimum space Raised neutral link for easy wiring Suitable for surface & fush mounting Detachable din bar with end stoppers for easy assembly of breakers Supplied with fully shielded bus-bars Level marks for providing indication for fitment in wall Supplied with neutral & earth link, top & bottom detachable plates Supplied with masking sheet to protect components from cement during plastering
SKU: 263 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
185mm x 4Core Armoured Cable (Nigerchin Cable and Wire)/Per meter
ARMOURED CABLE, ELECTRICAL INDUSTRIAL185mm x 4Core Armoured Cable (Nigerchin Cable and Wire)/Per meter
0 out of 5(0)185mm 4 Core Armoured Cable is a size and type of steel wire armoured cable. Primarily found in large powered networks and underneath roadways supplying mains electricity to large buildings. It can also be found within the transport industry, specifically railways powering the trains and buildings located beside the tracks. Due to the size of this cable, it is perfectly suitable for large amounts of power running through it on a daily basis, 24 hours a day.
The best solution to this issue would be to buy a length of earth cable that matches the length of the Armoured Cable. This would negate the steel wire from being used as an earth, meaning it is a safer alternative.
185mm 4 Core Armoured Cable is constructed from the following materials;
– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
– Voltage Rating – 600/1000VtSKU: 185mmnigerchin -
CHANDELIER LIGHT, ELECTRICAL FITTINGS, Electro, HOME&OFFICE LIGHTING, LIGHTING
Loopal Pendant Light Fitting
Related products
-
Electro, ELECTRICAL INDUSTRIAL, WIRE CABLE TRAY & CABLE LADDER
200mm x 50mm Foreign Wire Merge Cable Tray By 3Meter
Electro, ELECTRICAL INDUSTRIAL, WIRE CABLE TRAY & CABLE LADDER200mm x 50mm Foreign Wire Merge Cable Tray By 3Meter
0 out of 5(0)Cable tray are the most common solution for supporting and routing of cables in an installation.
For this reason, cable tray are available in a variety of sizes and standards, in order to cover the
wide range of applications.Embedded perforations for :
– extra load capacity
– better aeration
– better stability
– better condensation drainage
-50x300mmAlternative perforations for :
– better fixation on the supports
– very useful for cable fixation
-Standard finish GalvanizedSKU: 295 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
120mm x 4Core Armoured Cable (Coleman)/Per meter
0 out of 5(0)120mm 4 Core Armoured Cable is a variant of steel wire armoured cable used for industrial electrical applications as well as being suitable for direct burial to carry mains electricity to various powered devices. It is also commonly found within powered networks such as within power stations and factories, etc.
This cable is commonly identified by the following construction; plain annealed stranded copper for the cores/conductors, polyvinyl chloride for the bedding and sheathing, cross-linked polyethylene for the insulation, with a steel wire armour protecting the layers beneath.
Although this cable is suitable for powering smaller, more domestic installations such as powering an outdoor shed or house as well as garden/water features, it is most commonly found within more industrial practices, as mentioned previously.Voltage Rating: 600/1000Vt
SKU: colmean120mm -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
120mm x 4Core Armoured Cable (Nigerchin Cable and Wire)/Per meter
ARMOURED CABLE, ELECTRICAL INDUSTRIAL120mm x 4Core Armoured Cable (Nigerchin Cable and Wire)/Per meter
0 out of 5(0)120mm 4 Core Armoured Cable is a variant of steel wire armoured cable used for industrial electrical applications as well as being suitable for direct burial to carry mains electricity to various powered devices. It is also commonly found within powered networks such as within power stations and factories, etc.
This cable is commonly identified by the following construction; plain annealed stranded copper for the cores/conductors, polyvinyl chloride for the bedding and sheathing, cross-linked polyethylene for the insulation, with a steel wire armour protecting the layers beneath.
Although this cable is suitable for powering smaller, more domestic installations such as powering an outdoor shed or house as well as garden/water features, it is most commonly found within more industrial practices, as mentioned previously.Voltage Rating: 600/1000Vt
SKU: 240mmnigerchin
There are no reviews yet.