Add a little glamour to your room with our teal-accented Marie Therese five-arm indoor chandelier. Making a real statement in bedrooms, living rooms, dining rooms or hallways, this chandelier has five candles that are surrounded by a mass of crystal-effect beads and teal droplets, which twinkle to reflect the light beautifully. Measuring 46cm wide, this five-arm electric chandelier has an adjustable drop of between 54cm and 114cm. The crystal ceiling light shade requires mains supply, wiring and some assembly, for which full instructions are provided. It is for use indoors, is not suitable for bathrooms, and takes five SES 42W candle bulbs or 11W energy savers, which are not included. Always read instructions.
Chandelier Smoke With Teal 5 Arm
-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority-
₦0.00
Based on 0 reviews
Be the first to review “Chandelier Smoke With Teal 5 Arm”
Vendor Information
- Vendor: admin
- No ratings found yet!
- SOLAR POWERED
Solar Lantern Lamp 1
* Solar Panel:5.5/3W monocrystalline solar panel with cable of 6M
* Internal battery: rechargeable 3.7V, 5000mAh lithium battery
* Lamp: 1pc 3.7V/3W SMD LED lamp
* With USB output to charge mobile phones, mp3,mp4 etc. * Fully charging: About 9~10 hours by solar, about 12 hours by AC adaptor; * Lighting time: About 10hrs after fully chargedSKU: 1559 - CHANGEOVER SWITCHES
Powertec 125Amps Changeover Switch
Powertech products are type-tested and certified by authorized regulatory bodies, both within the UAE and internationally. The testing is conducted at labs and facilities in Europe that are recognized by LOVAG and guarantees the safety, functionality and durability of our products.
SKU: PT125 - CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 7 – 10amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload4
There are no reviews yet.