Three Phase(TPN) 4, 6, 8 & 12Ways MCB Protected Socket: Single Pole, Two Pole, Three Pole, Four Pole, SPN, TPN 10Amp, 15Amp, 20Amp, 32Amp, 40Amp, 50Amp, 63Amp, 80Amp, 100Amp,125Amp,200Amp etc
Eaton-MEM 12way Three Phase(TPN) Distribution Board C/W MCB
Features Compact DBs which occupy minimum space Raised neutral link for easy wiring Suitable for surface & fush mounting Detachable din bar with end stoppers for easy assembly of breakers Supplied with fully shielded bus-bars Level marks for providing indication for fitment in wall Supplied with neutral & earth link, top & bottom detachable plates Supplied with masking sheet to protect components from cement during plastering
₦678,000.00
CompareBased on 0 reviews
Be the first to review “Eaton-MEM 12way Three Phase(TPN) Distribution Board C/W MCB”
-
CATRIDGE AND INKS
HP 508A Yellow Original LaserJet Toner Cartridge (CF362A)
Overview
Count on HP Original JaserJet Toner Cartridges with JetIntelligence for high-quality at fast speeds, more pages with affordable high-yield options and innovative cartridge authentication technology.1
Features
Get the most out of every cartridge you buy. HP Original LaserJet Toner Cartridges with JetIntelligence deliver accurate tracking of toner levels and cost-effective, high-yield options.2Produce even more of the top-quality documents you expect from HP. ColorSphere 3 toner is specially engineered to match your printer’s high-speed performance thanks to its low melting point, achieving the quality you depend on to look professional.
Built into every HP Original LaserJet Toner Cartridge with JetIntelligence, HP’s exclusive anti fraud technology protects you from potential counterfeit cartridges by authenticating the cartridge as it is installed.
Get high-quality prints from your printer. HP Original LaserJet Toner Cartridges with JetIntelligence match your printer’s high-speed performance and increase efficiency.
Specifications
Color(s) of printing supplies
Yellow
Print technology
Laser
Page yield (color)
5,000 pagesSKU: HP508Y -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
185mm x 4Core Armoured Cable (Nigerchin Cable and Wire)/Per meter
ARMOURED CABLE, ELECTRICAL INDUSTRIAL185mm x 4Core Armoured Cable (Nigerchin Cable and Wire)/Per meter
185mm 4 Core Armoured Cable is a size and type of steel wire armoured cable. Primarily found in large powered networks and underneath roadways supplying mains electricity to large buildings. It can also be found within the transport industry, specifically railways powering the trains and buildings located beside the tracks. Due to the size of this cable, it is perfectly suitable for large amounts of power running through it on a daily basis, 24 hours a day.
The best solution to this issue would be to buy a length of earth cable that matches the length of the Armoured Cable. This would negate the steel wire from being used as an earth, meaning it is a safer alternative.
185mm 4 Core Armoured Cable is constructed from the following materials;
– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
– Voltage Rating – 600/1000VtSKU: 185mmnigerchin -
ELECTRICAL FITTINGS, Electro, TRUNCKING
50x75mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 412 -
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGS
Fluorescent Fitting Philip with lamps 2ft Single Philips
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGSFluorescent Fitting Philip with lamps 2ft Single Philips
1. Effective, high-quality batten for a single fluorescent lamp; suitable for both direct and indirect lighting applications
2. Integrated slim HF electronic ballast for compactness
3. Easy fixing to ceiling with baseplate on which all the electrical and mechanical components are mounted
4. Low Energy Consumptiom
5. Fluorescent Tube IncludedSKU: fitting4
There are no reviews yet.