The Clipsal C-Bus system is a microprocessor based wiring system to control lighting and other electrical services. From on/off control of a lighting circuit to analogue type control, Such as dimming electronic fluorescent ballasts, C-Bus can control and automate virtually any type of electrical load
Legrand CLIPSAL SWITCH 1 GANG – 30Amps
Key Features:
1 gang
Rockers are a long throw momentary action type
C-bus learn enabled
LED button indicators provide illumination and status feedback
Night light feature
Fall back level option to dim indicators at a set time after the last button press
Mounted using standard mounting accessories
₦6,600.00
CompareBased on 0 reviews
Be the first to review “Legrand CLIPSAL SWITCH 1 GANG – 30Amps”
-
ELECTRICAL INDUSTRIAL, Electro, WIRE CABLE TRAY & CABLE LADDER
100mm x 150mm Foreign Wire Merge Cable Tray By 3 Meter
ELECTRICAL INDUSTRIAL, Electro, WIRE CABLE TRAY & CABLE LADDER100mm x 150mm Foreign Wire Merge Cable Tray By 3 Meter
Cable tray are the most common solution for supporting and routing of cables in an installation.
For this reason, cable tray are available in a variety of sizes and standards, in order to cover the
wide range of applications.Embedded perforations for :
– extra load capacity
– better aeration
– better stability
– better condensation drainage
-50x300mmAlternative perforations for :
– better fixation on the supports
– very useful for cable fixation
-Standard finish GalvanizedSKU: WireM3 -
ELECTRICAL INDUSTRIAL, Electro, WIRE CABLE TRAY & CABLE LADDER
50mm x 50mm Foreign Original Galvanized Wire Merge Cable Tray By 3 Meter
ELECTRICAL INDUSTRIAL, Electro, WIRE CABLE TRAY & CABLE LADDER50mm x 50mm Foreign Original Galvanized Wire Merge Cable Tray By 3 Meter
Cable tray are the most common solution for supporting and routing of cables in an installation.
For this reason, cable tray are available in a variety of sizes and standards, in order to cover the
wide range of applications.Embedded perforations for :
– extra load capacity
– better aeration
– better stability
– better condensation drainage
-50x300mmAlternative perforations for :
– better fixation on the supports
– very useful for cable fixation
-Standard finish GalvanizedSKU: GAL1 -
ACCESSORIES, HALOGEN
POWER STAR HQ1-T 400W
Product benefits
Output of up to 400 W
High efficiency
Long lifetime
E40 screw base for simple lamp handling
UV values significantly below the maximum permitted thresholds to IEC 61167 thanks to UV filterAreas of application
Factories and workshops
Sports halls and multi-purpose halls
Industrial installations
Docks and port facilities
Marshaling yards, container transshipment facilities
Buildings, monuments, bridges
Approved only for use in enclosed luminaires
Outdoor applications only in suitable luminairesProduct features
POWERSTAR quartz technology
Light colors: neutral white (N), daylight (D)SKU: Powerstart400W -
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1
There are no reviews yet.