In 1927, MEM embarked on a new field of manufacture – motor control gear, to meet the increasing use of electric motors in industry, and in 1965 announced its first miniature circuit breaker range. Delta Metal acquires MEM in 1971 to enter the electrical sector and Delta’s Electrical Division then consolidates several divisions of MEM (250V, 500V), as well as Bill Switchgear, under the “MEM” brand in 1998 The Electrical Division of Delta was acquired by Eaton Corporation in 2003, including the MEM, Bill and Holec brands, to spearhead the drive into global markets with products designed to meet international standards
MEM – Eaton 300A TPN Gear Switch
The top and bottom endplates are removable. Door can be removed for ease of installation. Incorporate knockouts and gasketed doors, IP41 rated protection. Handle: chromium-plated handles with ON (I) / OFF (O) indication. The switch can be locked ON or OFF by means of a padlock. Internal fixing: enables the unit to be mounted side by side with other units. Maximum current: 300A Number of Poles: 3 Poles. 3 Phase. Switches: quick make-and-break type, suitable for use on AC or DOC. Removable moving contact assemblies: to facilitate wiring. Interiors comprise porcelain bases fitted with non-ferrous conducting components.
₦265,000.00
Based on 0 reviews
Be the first to review “MEM – Eaton 300A TPN Gear Switch”
Vendor Information
- Address:
- No ratings found yet!
-
ELECTRICAL INDUSTRIAL, Electro, LADDERS
16 Feet Fiberglass Ladder
ladder comes in a vertical or inclined set of rungs or steps. There are two types: rigid ladders that can be leaned against a vertical surface such as a wall, and rope ladders that are hung from the top. The vertical members of a rigid ladder are called stringers or rails (US) or stiles (UK). Rigid ladders are usually portable, but some types are permanently fixed to buildings. They are commonly made of metal, wood, or Fiberglass, but they have been known to be made of tough plastic.
SKU: 302 -
GEAR SWITCHES
HAVELLS 400A ROTARY CHANGEOVER SWITCH
• Suitable for individual mounting, inner mounting holes and mounting brackets provided in enclosures.
• Sheet steel enclosure duly phosphatised and powder painted for longer life.
• Provision for door interlocking.
• Termination suitable for Aluminum cables, adequate knockouts provided in the enclosure for cable entry
630A, 63A, 400A, 200A,SKU: 1573 -
Electro, ENERGY SAVING BULBS, LIGHT BULBS, LIGHTING
Torch B22 (Pin) 11W Energy Saving Bulb
Specifications:
• Optional wattage: 7-105W
• Operating voltage: 110 to 130V or 220 to 240V
• Frequency: 50/60Hz
• Average lifetime: 6000hrs/8000 hrs/10000hrs available
• Optional base: E27/B22/E14
• Optional Color Temperature: 2,700K/4,100K/6,500KApplications:
Shopping malls, table lamps, pendent lamps, supermarkets, restaurants, shops, hotels etc.SKU: 861 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 2.3-4amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload2
There are no reviews yet.