In 1927, MEM embarked on a new field of manufacture – motor control gear, to meet the increasing use of electric motors in industry, and in 1965 announced its first miniature circuit breaker range. Delta Metal acquires MEM in 1971 to enter the electrical sector and Delta’s Electrical Division then consolidates several divisions of MEM (250V, 500V), as well as Bill Switchgear, under the “MEM” brand in 1998 The Electrical Division of Delta was acquired by Eaton Corporation in 2003, including the MEM, Bill and Holec brands, to spearhead the drive into global markets with products designed to meet international standards
MEM – Eaton 63A TPN Gear Switch
The top and bottom endplates are removable. Door can be removed for ease of installation. Incorporate knockouts and gasketed doors, IP41 rated protection. Handle: chromium-plated handles with ON (I) / OFF (O) indication. The switch can be locked ON or OFF by means of a padlock. Internal fixing: enables the unit to be mounted side by side with other units. Maximum current: 63A Number of Poles: 3 Poles. 3 Phase. Switches: quick make-and-break type, suitable for use on AC or DOC. Removable moving contact assemblies: to facilitate wiring. Interiors comprise porcelain bases fitted with non-ferrous conducting components.
₦199,999.00
CompareBased on 0 reviews
Be the first to review “MEM – Eaton 63A TPN Gear Switch”
-
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
Standard 32Amps Changeover Switch
Features:
DMC terminal blocks are provided for cable termination having excellent mechanical, thermal and dielectric properties.
Side Handle Operation.
The enclosure is made of sheet steel suitable for individual mounting.
Terminals suitable for both Al. & Cu conductors.
Adequate knockouts provided for entry of cables.
Door interlocking facility provided.
mounting holes for switch ratings upto 320A and mounting brackets
for switch rating of 400A and above.SKU: Standard32 -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Schneider Electric 1 Phase 8 Ways DIN ROW Distribution Board enclosure
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroSchneider Electric 1 Phase 8 Ways DIN ROW Distribution Board enclosure
Features
* Device Mounting – Flush
* Product or Component Type – Distribution Board
* Product Range – Disbo
* Number of Phases – 1 Phase
* Type of Inomer – 2P Isolator 63A
* Number of Ways – 8 WayBenefits:
– Spectacular Design – Blends seamlessly with interiors
– Maximized Wiring Space – Convenient and Safe wiring
– Adaptable – Total Flexibility for ease of installation and usage
– Robust Architecture – Perfect blend of Strength & WeightTechnically Proven – Safety Guaranteed
– Technically Proven – Safety GuaranteedApplications:
It is housing to mount multiple electrical Modular devices (like MCBs, RCCBs, Surge Protection Devices, Change over switch, Isolators, indicating devices etc.) used for distribution, protection , control and automation at final distribution level.SKU: Schneider11 -
Uncategorized
Ultra Wireless S50 Headphones S50 with Bluetooth
- 4.5 inch HD Touch Screen (1280 x 720)
- Android 4.4 KitKat OS
- 1.4 GHz Quad Core™ Processor
- 20 MP front and 28 megapixel CMOS rear camera
Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt.
SKU: FW511948218
SKU: FW511948218 -
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
STANLEY 200A Changeover
Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. Our new range products in sheet metal Side Handle Operating Changeover are made as per industrial requirements with powder coating. This certificate of “Stanley” original products, issued with the assurance as the same has been manufactured in accordance with requirement of IEC-60947-3 (2005-06). Quality system, standards and mechanism has been tested satisfactory to the specific test as follows: 1. Dielectric Test 2. Mechanical Operation Test 3. High Voltage Test 4. Insulation Resistance Test 5. Temperature Rise Test 6. Mini Volt Drop Test STANLEY 200A Changeover
SKU: 1576 -
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
16mm x 4 Core Amroured Cable (Kablemetal Nexans Nigeria)
16mm 4 Core Armoured Cable is a variant of electrical cable that has a cross-sectional diameter of 16mm as well as a Live and Neutral core within the cable itself.
The construction of this cable is commonly identified by the plain annealed stranded copper used for the conductors/cores, cross-linked polyethylene (XLPE) for the insulation, PVC (Polyvinyl Chloride) for both the bedding and sheathing and steel wire for the armour protecting the insulating layers beneath.
The steel wire armour also provides a form of mechanical protection, which means that it has higher pulling loads making it suitable for being dispensed from large cable drums. As well as providing mechnical protection, it also ensures that the cable can withstand highly corrosive environments such as being installed underground as well as being attached to outdoor walls and structures using Cable Cleats.
16mm 4 Core Armoured Cable is found in a wide range of industries across the globe. Some examples of the most common ones are:-
– The transport industry
– Railway industry
– Underneath roads carrying mains electricity to buildings
– Cable Ducting within warehouses.
No. of cores / size of cable – 4
Approx overall diameter – 23.6mm
Approx weight (m) – 1.3Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: 600/1000SKU: 1519
There are no reviews yet.