3x 33m rolls of Wilko PVC Insulating Tape. Flame retardant, cold weather resistant.
PVC Insulating Tape
Always read instructions.
₦1,800.00
CompareBased on 0 reviews
Be the first to review “PVC Insulating Tape”
-
CHANDELIER LIGHT, Electro, HOME&OFFICE LIGHTING, LIGHTING
Marie Therese Chandelier Clear 3 Arm
‘-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority-
SKU: 203 -
Electro, ENERGY SAVING BULBS, LIGHT BULBS, LIGHTING
Torch E27(Screw) 20W Energy Saving Bulb
Specifications:
• Optional wattage: 7-105W
• Operating voltage: 110 to 130V or 220 to 240V
• Frequency: 50/60Hz
• Average lifetime: 6000hrs/8000 hrs/10000hrs available
• Optional base: E27/B22/E14
• Optional Color Temperature: 2,700K/4,100K/6,500KApplications:
Shopping malls, table lamps, pendent lamps, supermarkets, restaurants, shops, hotels etc.SKU: 869 -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Schneider Electric 3 Phase 12 Ways Distribution Board
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroSchneider Electric 3 Phase 12 Ways Distribution Board
Disbo-Extra Isobar is a complete range of single and 3 phase distribution boards for commercial and industrial applications.
Standard distribution boards up to 24 ways
Meter ready distribution boards up to 24 ways
Split metered distribution boards up to 22 ways
Any outgoing way can be converted to switch the Neutral
Fully type tested conditional short circuit rating of 25kA to BS EN 61439-3
High performance MCB 10kA BS EN 60898 15kA BS EN 60947-2 in B, C or D curve 1, 2, 3, 4 pole
250A Busbar rating
Isobar disconnection to BS EN 60947-3 ensuring unused outgoing ways are isolated
Option of switching outgoing neutral on all boards using distributed neutral kit
Terminal block for feeding up to 100A
Range of incomers: switch disconnectors, residual current devices, terminal blocks, MCCB
Single pole RCBO for new or retrofit maintaining device density
Full range of device accessories and auxiliaries
Knockouts for cable gland and conduit mixed to suit the installation needs without loss of space
Removable insulated pan assembly
Fully shrouded neutral
Split neutral bars
Removable gland plates
Optional metering, dual supply, surge protection and contactor on incoming Metered extension enclosures.SKU: Schneider9 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
185mm x 4Core Armoured Cable (Kabelmetal Nexans Nigeria)/Per meter
ARMOURED CABLE, ELECTRICAL INDUSTRIAL185mm x 4Core Armoured Cable (Kabelmetal Nexans Nigeria)/Per meter
185mm 4 Core Armoured Cable is a size and type of steel wire armoured cable. Primarily found in large powered networks and underneath roadways supplying mains electricity to large buildings. It can also be found within the transport industry, specifically railways powering the trains and buildings located beside the tracks. Due to the size of this cable, it is perfectly suitable for large amounts of power running through it on a daily basis, 24 hours a day.
The best solution to this issue would be to buy a length of earth cable that matches the length of the Armoured Cable. This would negate the steel wire from being used as an earth, meaning it is a safer alternative.
185mm 4 Core Armoured Cable is constructed from the following materials;
– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
– Voltage Rating – 600/1000VtSKU: 1524 -
Electro, ENERGY SAVING BULBS, LIGHT BULBS, LIGHTING
Torch E27 (Pin) 65W Energy Saving Bulb
Specifications:
• Optional wattage: 7-105W
• Operating voltage: 110 to 130V or 220 to 240V
• Frequency: 50/60Hz
• Average lifetime: 6000hrs/8000 hrs/10000hrs available
• Optional base: E27/B22/E14
• Optional Color Temperature: 2,700K/4,100K/6,500KApplications:
Shopping malls, table lamps, pendent lamps, supermarkets, restaurants, shops, hotels etc.SKU: 871 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 18 – 23amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload7
There are no reviews yet.