T2 lamp holder batten straight, Max 100w/2ampStraight batten lamp holder. 250V only. If in doubt consult a qualified electrician.
T2 Lampholder Batten Straight
Always read instructions.
₦150.00
CompareBased on 0 reviews
Be the first to review “T2 Lampholder Batten Straight”
-
ELECTRICAL INDUSTRIAL, Electro, TRANSFORMER
ABB 1000KVA 33/400KV Distribution Transformer
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
SKU: transfor1.5kva2 -
EMERGENCY LIGHTS, FLUORESCENT FITTINGS, INDOOR LIGHTS, LIGHTING
LUCECO UK LED EMERGENCY BULKHEADS 2YEAR WARRANTY
EMERGENCY LIGHTS, FLUORESCENT FITTINGS, INDOOR LIGHTS, LIGHTINGLUCECO UK LED EMERGENCY BULKHEADS 2YEAR WARRANTY
3 HR Emergency duration
Non-Maintained only
Li-Ion battery
Indoor and Outdoor use
Self-Adhesive Legend kit sold separately – LEMBKLEGLUMINAIRE PERFORMANCE
Light Output Ratio 100%
Luminaire Efficacy 38.56lm/W
Light Distribution A21 ↓ 97.7% ↑ 2.3%
CIE Flux Codes 27 55 90 98 100
UGR 4H 8H (20%, 50%, 70%) C0/C90 23.7 / 15.7SKU: luceco EMER -
HIGH BAY LIGHTS
Luceco LED Highbay Light LHBR 200W (31200lm)
Product Features
IP65 highbay with industry-leading efficacy
Multiple mounting options
Integrated heat sink
IP65 PIR sensor compatible
IP65 Integrated emergency
Stainless steel hardware
0-10V Dimmable
Supplied with 2′ of SJTW cable
1′ safety chain includedColor Temperature: 4000K, 5000K
Efficacy: Up to 160lm/W
Lumen Maintenance: L70 calculated at 100,000hrs
IP Rating: IP65
Beam Angle: 60°, 90°, 120°SKU: Luceco200w -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
95mm x 4 Core Armoured Cable (Coleman)
95mm 4 Core Armoured Cable is a variant of steel wire armoured cable used for industrial electrical applications as well as being suitable for direct burial to carry mains electricity to various powered devices. It is also commonly found within powered networks such as within power stations and factories, etc.
This cable is commonly identified by the following construction; plain annealed stranded copper for the cores/conductors, polyvinyl chloride for the bedding and sheathing, cross-linked polyethylene for the insulation, with a steel wire armour protecting the layers beneath.
Although this cable is suitable for powering smaller, more domestic installations such as powering an outdoor shed or house as well as garden/water features, it is most commonly found within more industrial practices, as mentioned previously.
No. of cores / size of cable – 4
Approx overall diameter – 40.6mm
Approx weight (m) – 5.39Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel Wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Primarily used in large industrial power networks, powering multiple devices at once.SKU: coleman95mm
There are no reviews yet.