A 12 way terminal block connector suitable for up to 30amp.
Terminal Block 12 Way 30a/length
A 12 way terminal block connector suitable for up to 30amp.
₦500.00
CompareBased on 0 reviews
Be the first to review “Terminal Block 12 Way 30a/length”
-
Electro, ENERGY SAVING BULBS, LIGHT BULBS, LIGHTING
Torch B22 (Pin) 40W Energy Saving Bulb
Specifications:
• Optional wattage: 7-105W
• Operating voltage: 110 to 130V or 220 to 240V
• Frequency: 50/60Hz
• Average lifetime: 6000hrs/8000 hrs/10000hrs available
• Optional base: E27/B22/E14
• Optional Color Temperature: 2,700K/4,100K/6,500KApplications:
Shopping malls, table lamps, pendent lamps, supermarkets, restaurants, shops, hotels etc.SKU: 863 -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Havells 4 Way 100A Three Phase(TPN) Distribution Board C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroHavells 4 Way 100A Three Phase(TPN) Distribution Board C/W MCB
Features Compact DBs which occupy minimum space Raised neutral link for easy wiring Suitable for surface & fush mounting Detachable din bar with end stoppers for easy assembly of breakers Supplied with fully shielded bus-bars Level marks for providing indication for fitment in wall Supplied with neutral & earth link, top & bottom detachable plates Supplied with masking sheet to protect components from cement during plastering
SKU: 274 -
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
Standard 32Amps Changeover Switch
Features:
DMC terminal blocks are provided for cable termination having excellent mechanical, thermal and dielectric properties.
Side Handle Operation.
The enclosure is made of sheet steel suitable for individual mounting.
Terminals suitable for both Al. & Cu conductors.
Adequate knockouts provided for entry of cables.
Door interlocking facility provided.
mounting holes for switch ratings upto 320A and mounting brackets
for switch rating of 400A and above.SKU: Standard32 -
-
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 23 – 32amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload6
There are no reviews yet.