TeSys LR9D and LR9F electronic overload relays provide simple, flexible and reliable motor protection.
TeSys Schneider Electric Overload Relays 7 – 10amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.
₦11,500.00
CompareBased on 0 reviews
Be the first to review “TeSys Schneider Electric Overload Relays 7 – 10amps”
-
Electro, FUSE & BASE, GEAR SWITCHES & CHANGEOVER
ABB TPN Switch Fuse
With ABB’s change-over switches, people and equipment are safe
Easy and flexible installation
Depending on the size, the switch can be mounted in different positions, on the panel door or DIN rail. Snap-on accessories and connections are available.
• IP65 rated (not suitable for external installation) Steel Enclosure
• Powder coated textured finish (RAL 7035)
• All switches are supplied with fuses and removable gland plates
• All 3 pole switches include detachable neutral link (OT160 solid link)
• Hinged lid complete with lock
• Switch Fuses are internally rated IP20 on incoming terminals up to 63A
• Pad lockable pistol grip handle as standard • Switch Fuses 100A are supplied with incoming terminal shrouds not fitted to allow customer connectionsSKU: 288 -
ACCESSORIES, ELECTRICAL INDUSTRIAL
Industrial Extension, 2.5mm x 40mtr – 3way – Brennenstuhl
FEATURES:
– Ergonomic cable guide handle for perfect cable-management during winding
– With thermal cut-out protection against overheating or overload
– Safety Cut Out.
– Nominal current: 13 A.
– Suited for 40 meters of cable.
– Equipped with 3 sockets with self closing covers.
– Protection against overheating.
– Indicator light to prevent overheating.
– Voltage: 220 – 240V
– Made in GermanySKU: Extension1 -
ELECTRICAL FITTINGS, Electro, TRUNCKING
50x50mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 411 -
SOLAR POWERED
Solar Lantern Lamp 1
* Solar Panel:5.5/3W monocrystalline solar panel with cable of 6M
* Internal battery: rechargeable 3.7V, 5000mAh lithium battery
* Lamp: 1pc 3.7V/3W SMD LED lamp
* With USB output to charge mobile phones, mp3,mp4 etc. * Fully charging: About 9~10 hours by solar, about 12 hours by AC adaptor; * Lighting time: About 10hrs after fully chargedSKU: 1559 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 2.3-4amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload2
There are no reviews yet.