Energy Saving Lamp
Features:
• More compact structure, cuter appearance
• High light output and excellent color rendering
• Dramatic energy saving and longer life
• Flicker free starting operation
• Ideal replacement of incandescent lamp
• T2,T3, T4 ,T5 tube are available
Torch E27(Screw) 20W Energy Saving Bulb
Out of stock
Specifications:
• Optional wattage: 7-105W
• Operating voltage: 110 to 130V or 220 to 240V
• Frequency: 50/60Hz
• Average lifetime: 6000hrs/8000 hrs/10000hrs available
• Optional base: E27/B22/E14
• Optional Color Temperature: 2,700K/4,100K/6,500K
Applications:
Shopping malls, table lamps, pendent lamps, supermarkets, restaurants, shops, hotels etc.
₦3,000.00
Out of stock
CompareBased on 0 reviews
Be the first to review “Torch E27(Screw) 20W Energy Saving Bulb”
- ARMOURED CABLE, ELECTRICAL INDUSTRIAL
185mm x 4Core Armoured Cable (Kabelmetal Nexans Nigeria)/Per meter
ARMOURED CABLE, ELECTRICAL INDUSTRIAL185mm x 4Core Armoured Cable (Kabelmetal Nexans Nigeria)/Per meter
185mm 4 Core Armoured Cable is a size and type of steel wire armoured cable. Primarily found in large powered networks and underneath roadways supplying mains electricity to large buildings. It can also be found within the transport industry, specifically railways powering the trains and buildings located beside the tracks. Due to the size of this cable, it is perfectly suitable for large amounts of power running through it on a daily basis, 24 hours a day.
The best solution to this issue would be to buy a length of earth cable that matches the length of the Armoured Cable. This would negate the steel wire from being used as an earth, meaning it is a safer alternative.
185mm 4 Core Armoured Cable is constructed from the following materials;
– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
– Voltage Rating – 600/1000VtSKU: 1524 - ELECTRICAL FITTINGS, Electro, MODULAR FITTING
4x36W 600×600 Recessed Modular Prismatic
Modular Fitting has an extremely small recess depth 53mm which makes it perfect for shallow ceiling voids. It is also suitable for lay in suspended grid ceilings and comes complete with wire retention safety cable. Rapid installation and maintenance are further facilitated by a quick release louvre device, which is particularly useful during potentially disruptive lamp changes. Ivy Classic is also supplied with a peel off protective cover, to keep the luminaire bright, clean and dust free during carriage and installation.
Once in place, Modular Fitting offers bright, glare free lighting courtesy of its brilliant aluminum louvre and either its 4 x 14W or 3 x 14W T5 lamps. This efficient combination of source and reflector offers a high light output ratio (LOR) of up to 78% and more.
SKU: 057 - CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
STANLEY 100A Changeover Switch
Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. Our new range products in sheet metal Side Handle Operating Switchgear are made as per industrial requirements with powder coating. This certificate of “Stanley” original products, issued with the assurance as the same has been manufactured in accordance with requirement of IEC-60947-3 (2005-06). Quality system, standards and mechanism has been tested satisfactory to the specific test as follows: 1. Dielectric Test 2. Mechanical Operation Test 3. High Voltage Test 4. Insulation Resistance Test 5. Temperature Rise Test 6. Mini Volt Drop Test STANLEY 100A Changeover Switch
SKU: 1575 - DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Eaton-MEM 4way Three Phase(TPN) Distribution Board C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroEaton-MEM 4way Three Phase(TPN) Distribution Board C/W MCB
Compact DBs which occupy minimum space Raised neutral link for easy wiring Suitable for surface & fush mounting Detachable din bar with end stoppers for easy assembly of breakers Supplied with fully shielded bus-bars Level marks for providing indication for fitment in wall Supplied with neutral & earth link, top & bottom detachable plates Supplied with masking sheet to protect components from cement during plastering
SKU: 250












There are no reviews yet.