Metallic Delta Cable ladders are manufactured for the smooth and easy pulling of cable from one point to another. We have designed the best cable ladders, by taking care of cable loads and practical site problems. The rungs are heavy duty strut channels which provides a heavy support to the cables even in wider ladders. Delta Cable ladders is having maximum cable loading depth by fixing rungs at the lowest point of side rails. Spacings of rungs are done in such a way that it enables the dropping of any large diameter cables.
TransDelta 200 x 150 x 3mtrs Cable Ladders
₦0.00
CompareBased on 0 reviews
Be the first to review “TransDelta 200 x 150 x 3mtrs Cable Ladders”
-
EMERGENCY LIGHTS, FLUORESCENT FITTINGS, FLUORESENT TUBES
BARDIC EMERGENCY LIGHT
BARDIC, a brand of MPower supplies off the shelf product lines for emergency and exit lighting including centrally monitored systems and custom solutions for building owners, maintenance managers and contractors seeking emergency lighting with energy efficient capabilities and a long lasting design life.
SELF CONTAINED EMERGENCY LIGHT
CA8/NM/3F
RATING: 3 HOURS NON-MAINTAINED W/O REST MODE
RATED INPUT: ~230/240Vac + 6% – 10% 50/60hZ 9va
LAMP: 8W T5 6400K
WITH SEAL FITTED = IP65SKU: BARDIC 1 -
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1 -
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGS
Fluorescent Fitting Philip without lamps 4ft Twin Philips
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGSFluorescent Fitting Philip without lamps 4ft Twin Philips
1. Effective, high-quality batten for a twin fluorescent lamp; suitable for both direct and indirect lighting applications
2. Integrated slim HF electronic ballast for compactness
3. Easy fixing to ceiling with baseplate on which all the electrical and mechanical components are mounted
4. Low Energy Consumptiom
5. Fluorescent Tube IncludedSKU: fitting2 -
ELECTRICAL FITTINGS, Electro, TRUNCKING
16x16mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 407 -
Electro, GEAR SWITCHES, GEAR SWITCHES & CHANGEOVER
Havells Side Handle GearSwitch 200 Amp
An essential part of the electrical circuitry system at homes, offices or anywhere else, switchgear like circuit breakers, distribution boards, energy savers etc. are used for superior power distribution and power monitoring and control. The team of engineers at Havells have designed a premium range of switchgear which is an ideal example flawless machinery at affordable prices.
SKU: HG3
There are no reviews yet.