Each Armored cable contains high strength, good bending performance, no gel, easy to be connected and operated on with buffer design, independent strength member and sheath to prevent damage from environmental and mechanical stress. Outer jacket’s colors varies according to the types of optical fibers (indoor use), black color is recommended for outdoor use, options for other colors available upon request.
1.5mm x 4Core Armoured Cable (Kablemetal)
1.5mm 4 Core Armoured Cable is a form of electrical cable, primarily found in electrical installations such as powered devices and networks, powering outdoor features such as lighting and jacuzzis, as well as industrial installations.
4 Core Cable contains brown, black, grey & blue coloured cores. It’s construction is commonly identified as steel for the wire armour, PVC for the outer sheathing and bedding, XLPE (Cross-Linked Polyethylene) for the insulation and plain annealed stranded copper for the cores.
As the cable contains a steel wire armour, this not only provides a form of mechanical protection, but can also be used an earth for the cable.
No. of cores / size of cable – 4
Approx overall diameter – 14mm
Approx weight (m) – 0.36 Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating – 600/1000Vt
₦2,950.00
CompareBased on 0 reviews
Be the first to review “1.5mm x 4Core Armoured Cable (Kablemetal)”
-
INDOOR LIGHTS
Lighting Transformers
S-150-12 Power Supply Transformer for LED Strip Light (Output:DC12V 3.5A – 30A, Input:AC100V-220V)
Built-in EMI filter;
100% load burn-in test;
Wide input voltage range;
Accurate and stable output voltage;
Output over-voltage, over-current and output short circuit protection;
Low output ripple and noise;
Two-year warranty;
MTBF> 50,000 hours;
Supply power to LED,suveillanc systems, and other electrical equipments which need direct current.SKU: PStrip01 -
ELECTRICAL FITTINGS, Electro, TRUNCKING
50x100mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 410 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 18 – 23amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload7
There are no reviews yet.