CHANGEOVER SWITCHES

Including a black plastic IP65 I-0-II pistol type handle (see the table below), shaft and bolt set for the cable connection. Handle padlockable in the 0-position, door interlock in the I- and Iipositions and when padlocked.

Categories

• Products » Low Voltage Products and Systems » Switches » Change-over and Transfer Switches » Manual Change-over Switches

Dimensions

• Product Net Width:  376 mm

• Product Net Height:  250 mm

• Product Net Depth / Length:  280 mm

• Product Net Weight:    18.51 kg

                                        40.81 lb

Technical

• Rated Operational Current AC-21A (I_e):

  (380 … 415 V) 630 A
  (500 V) 630 A
  (690 V) 630 A

• Rated Operational Current AC-22A (I_e):

  (380 … 415 V) 630 A
  (500 V) 630 A
  (690 V) 630 A

• Rated Operational Current AC-23A (I_e):

  (380 … 415 V) 630 A
  (500 V) 630 A
  (690 V) 630 A

• Rated Operational Current AC-31B (I_e):

  (380 … 415 V) 630 A

• Rated Operational Current AC-33B (I_e):

  (380 … 415 V) 630 A

• Rated Operational Power AC-23A (P_e):

  (380 … 415 V) 355 kW
  (500 V) 400 kW
  (690 V) 630 kW

• • Long Description:

    Including a black plastic IP65 I-0-II pistol type handle (see the table below), shaft and bolt set for the cable connection. Handle not padlockable and no door interlocking. Operating angle 90° to achieve fast switching. Minimum OFF-time between transfer from I-II or II-I is 20 ms.

  Categories

  • Products » Low Voltage Products and Systems » Switches » Change-over and Transfer Switches » Manual Change-over Switches

   

Technical

• Rated Operational Current AC-21A (I_e):

  (380 … 415 V) 800 A
  (500 V) 800 A
  (690 V) 800 A

• Rated Operational Current AC-22A (I_e):

  (380 … 415 V) 800 A
  (500 V) 800 A
  (690 V) 800 A

• Rated Operational Current AC-23A (I_e):

  (380 … 415 V) 800 A
  (500 V) 800 A
  (690 V) 800 A

• Rated Operational Current AC-31B (I_e):

  (380 … 415 V) 800 A

• Rated Operational Current AC-33B (I_e):

  (380 … 415 V) 800 A

• Rated Operational Power AC-23A (P_e):

  (380 … 415 V) 450 kW
  (500 V) 560 kW
  (690 V) 800 kW

• Conventional Free-air Thermal Current (I_th):

  q = 40 °C 800 A

• Conventional Thermal Current (I_the):

  Fully Enclosed 800 A

• Rated Impulse Withstand Voltage (U_imp):

  12 kV

• Rated Insulation Voltage (U_i):

  1000 V

• Rated Operational Voltage:

  1000 V

• Rated Short-time Withstand Current (I_cw):

  for 1 s 20 kiloampere rms

• Power Loss:

  40 W

Powertech products are type-tested and certified by authorized regulatory bodies, both within the UAE and internationally. The testing is conducted at labs and facilities in Europe that are recognized by LOVAG and guarantees the safety, functionality and durability of our products.

Powertech products are type-tested and certified by authorized regulatory bodies, both within the UAE and internationally. The testing is conducted at labs and facilities in Europe that are recognized by LOVAG and guarantees the safety, functionality and durability of our products.

Features:
DMC terminal blocks are provided for cable termination having excellent mechanical, thermal and dielectric properties.
Side Handle Operation.
The enclosure is made of sheet steel suitable for individual mounting.
Terminals suitable for both Al. & Cu conductors.
Adequate knockouts provided for entry of cables.
Door interlocking facility provided.
mounting holes for switch ratings upto 320A and mounting brackets
for switch rating of 400A and above.

Features:
DMC terminal blocks are provided for cable termination having excellent mechanical, thermal and dielectric properties.
Side Handle Operation.
The enclosure is made of sheet steel suitable for individual mounting.
Terminals suitable for both Al. & Cu conductors.
Adequate knockouts provided for entry of cables.
Door interlocking facility provided.
mounting holes for switch ratings upto 320A and mounting brackets
for switch rating of 400A and above.

Features:
DMC terminal blocks are provided for cable termination having excellent mechanical, thermal and dielectric properties.
Side Handle Operation.
The enclosure is made of sheet steel suitable for individual mounting.
Terminals suitable for both Al. & Cu conductors.
Adequate knockouts provided for entry of cables.
Door interlocking facility provided.
mounting holes for switch ratings upto 320A and mounting brackets
for switch rating of 400A and above.

Features:
DMC terminal blocks are provided for cable termination having excellent mechanical, thermal and dielectric properties.
Side Handle Operation.
The enclosure is made of sheet steel suitable for individual mounting.
Terminals suitable for both Al. & Cu conductors.
Adequate knockouts provided for entry of cables.
Door interlocking facility provided.
mounting holes for switch ratings upto 320A and mounting brackets
for switch rating of 400A and above.

An essential part of the electrical circuitry system at homes, offices or anywhere else, switchgear like circuit breakers, distribution boards, energy savers etc. are used for superior power distribution and power monitoring and control. The team of engineers at Havells have designed a premium range of changeover which is an ideal example flawless machinery at affordable prices.

An essential part of the electrical circuitry system at homes, offices or anywhere else, switchgear like circuit breakers, distribution boards, energy savers etc. are used for superior power distribution and power monitoring and control. The team of engineers at Havells have designed a premium range of changeover which is an ideal example flawless machinery at affordable prices.

Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. Our new range products in sheet metal Side Handle Operating Changeover are made as per industrial requirements with powder coating. This certificate of “Stanley” original products, issued with the assurance as the same has been manufactured in accordance with requirement of IEC-60947-3 (2005-06). Quality system, standards and mechanism has been tested satisfactory to the specific test as follows: 1. Dielectric Test 2. Mechanical Operation Test 3. High Voltage Test 4. Insulation Resistance Test 5. Temperature Rise Test 6. Mini Volt Drop Test STANLEY 200A Changeover

Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. STANLEY400A Changeover