The electric cable tray system are widely used for construction projects, such as laying electrical wire and cable. Making the lay of the electric wire, electric cable and pipeline achieved the universalized level. our combustion-proof pvc trunking has strength tenacity,and are combustion-proof,fire proofing,damp proof,acerbity resistant,aging resistance.
100x100mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.
₦7,100.00
CompareBased on 0 reviews
Be the first to review “100x100mm Dignity PVC Trunking”
-
CHANDELIER LIGHT, Electro, HOME&OFFICE LIGHTING, LIGHTING
York Light Fitting Ceiling Antique Brass Effect 3 Light
CHANDELIER LIGHT, Electro, HOME&OFFICE LIGHTING, LIGHTINGYork Light Fitting Ceiling Antique Brass Effect 3 Light
-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority-
SKU: 202 -
Electro, GEAR SWITCHES, GEAR SWITCHES & CHANGEOVER
Stanley Switch Gears – Side Handle 63Amp
Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. Our new range products in sheet metal Side Handle Operating Switchgear are made as per industrial requirements with powder coating. This certificate of “Stanley” original products, issued with the assurance as the same has been manufactured in accordance with requirement of IEC-60947-3 (2005-06). Quality system, standards and mechanism has been tested satisfactory to the specific test as follows: 1. Dielectric Test 2. Mechanical Operation Test 3. High Voltage Test 4. Insulation Resistance Test 5. Temperature Rise Test 6. Mini Volt Drop Test STANLEY 63A Gear Switch
SKU: StanleyGear2 -
ELECTRICAL INDUSTRIAL, TRANSFORMER
ABB Transformer 300KVA 33/400KV
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: 300KV
- Typical fluid: mineral oil
SKU: DTS30033
There are no reviews yet.