The electric cable tray system are widely used for construction projects, such as laying electrical wire and cable. Making the lay of the electric wire, electric cable and pipeline achieved the universalized level. our combustion-proof pvc trunking has strength tenacity,and are combustion-proof,fire proofing,damp proof,acerbity resistant,aging resistance.
25x40mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.
₦5,200.00
CompareBased on 0 reviews
Be the first to review “25x40mm Dignity PVC Trunking”
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
50mm x 4Core Armoured Cable (Kablemetal Nexans Nigeria)
50mm 4 Core Armoured Cable is a large and specific size of Armoured Cable, primarily found within large powered networks whilst also carrying power to a range of different powered devices. Although this cable can be used for domestic uses such as powering outdoor sheds and greenhouses as well as water features and outdoor lights, due to its size, it is commonly found within more industrial installations such as power stations and large construction sites.
The cable is constructed itself from the following; Plain Annealed Stranded Copper for the cores/conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing & steel wire for the armour protecting the layers beneath.
The steel wire armour within the cable also provides a mechanical protection, therefore it enables the cable higher pulling loads, which is useful for when the cable is being dispensed from a large drum.
No. of cores / size of cable – 4
Approx overall diameter – 31.3mm
Approx weight (m) – 2.95Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Used primarily within large powered networks supplying mains electricity to multiple devices.
Voltage Rating: 600/1000VtSKU: 1520 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 30 – 40amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload5 -
There are no reviews yet.