This contemporary five-arm chandelier will be a chic and understated centrepiece for any room. It features five chunky, squared-off, chrome-effect arms that, starting bunched together at the top, separate to sweep down and out at the bottom, where each candle is seated in a flat clear holder. The five-arm light fixture is for indoor use only and has a 33cm drop and a width of 54cm. It requires wiring and some assembly, for which full instructions are provided. This electric chandelier takes five SES (E14) 40W candle bulbs, or 9W energy savers, which are not included. Please note: this light fitting is not suitable for bathrooms. Always read instructions.
5 Arm Chandelier Chrome Ceiling Light Fitting
-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority-
₦0.00
CompareBased on 0 reviews
Be the first to review “5 Arm Chandelier Chrome Ceiling Light Fitting”
-
GEAR SWITCHES
MEM – Eaton 500A TPN Gear Switch
The top and bottom endplates are removable. Door can be removed for ease of installation. Incorporate knockouts and gasketed doors, IP41 rated protection. Handle: chromium-plated handles with ON (I) / OFF (O) indication. The switch can be locked ON or OFF by means of a padlock. Internal fixing: enables the unit to be mounted side by side with other units. Maximum current: 500A Number of Poles: 3 Poles. 3 Phase. Switches: quick make-and-break type, suitable for use on AC or DOC. Removable moving contact assemblies: to facilitate wiring. Interiors comprise porcelain bases fitted with non-ferrous conducting components.
SKU: MEM500 -
SOLAR POWERED
Solar – SZYL-SCL-N803
1. Solar panel: 5W/6V.
2. Lithium battery: 3.7 V/4000 mAh (bottom), 7V/2000mAh (top).
3. Lighting time (top): About 18 hours at low mode, about 10 hours at high mode; Lighting time (bottom): About 30 hours at low mode, About 16 hours at high mode.
4. USB output: 5V/0.5A, 5V/1.5A.
5. Charging time: 5 hours by 5W solar panel.
6. Multi-function: Mosquito Repellent, FM-Radio, MP3-Play, Manual generator device, Mobile charger.SKU: 1532 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
150mm x 4 Core S.W.A/P.V.C Armoured Cable (Nigerchin Cable and Wire)
ARMOURED CABLE, ELECTRICAL INDUSTRIAL150mm x 4 Core S.W.A/P.V.C Armoured Cable (Nigerchin Cable and Wire)
150mm 4 Core Armoured Cable is a variant of steel wire armoured cable used for industrial electrical applications as well as being suitable for direct burial to carry mains electricity to various powered devices. It is also commonly found within powered networks such as within power stations and factories, etc.
This cable is commonly identified by the following construction; plain annealed stranded copper for the cores/conductors, polyvinyl chloride for the bedding and sheathing, cross-linked polyethylene for the insulation, with a steel wire armour protecting the layers beneath.
Although this cable is suitable for powering smaller, more domestic installations such as powering an outdoor shed or house as well as garden/water features, it is most commonly found within more industrial practices, as mentioned previously.SKU: 150mmnigerchin -
CABLE AND CABLE MANAGEMENT, Electro, SINGLE CORE WIRE
Cutix 16mm Single Core Copper Wire
Our cables with PVC (Polyvinyl Chloride) sheathing are used in a vast number of applications from fixed wiring to flexible installations and they are available in various sizes, colours and number of conductors.
SKU: 338 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
25mm x 4Core Armoured Cable – Coleman
Suitable for under and over-ground usage alike, 25mm 4 Core Armoured Cable is a dust and waterproof variant of electrical cable that is commonly found within powered networks and supplying mains electricity to a large variety of devices, both domestic and industrial.
This particular type of cable is constructed using Plain Annealed Stranded Copper for the conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing and Steel Wire for the armouring.
Not only does the Steel Wire Armour provide a method of mechanical protection, meaning it is suitable for installation into highly-corrosive environments, the armour also provides a form of CPC (Circuit Protective Conductor) meaning it can be used as an earth for the cable. This means that an earth core/cable is not required although it is still recommended as an extra safety measure.
No. of cores / size of cable – 4
Approx overall diameter – 18.7mm
Approx weight (m) – 0.75Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating – 600/1000VtSKU: coleman25mm
There are no reviews yet.