ABB offers a complete range of copper distribution transformers designed to grant the reliability, durability, and efficiency required in utility,
ABB 1.5KVA 11/400KV Distribution Transformer
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
₦48,800,000.00
CompareWeight | 2 kg |
---|
Based on 0 reviews
Be the first to review “ABB 1.5KVA 11/400KV Distribution Transformer”
-
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Eaton-MEM 6way Three Phase(TPN) Distribution Board C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroEaton-MEM 6way Three Phase(TPN) Distribution Board C/W MCB
Features Compact DBs which occupy minimum space Raised neutral link for easy wiring Suitable for surface & fush mounting Detachable din bar with end stoppers for easy assembly of breakers Supplied with fully shielded bus-bars Level marks for providing indication for fitment in wall Supplied with neutral & earth link, top & bottom detachable plates Supplied with masking sheet to protect components from cement during plastering
SKU: 263 -
ACCESSORIES
50mm PVC Pipe (3mtrs) – 40 inches per unit
The heavy duty PVC ensures a strong construction for all applications and can withstand chemical and temperature fluctuations without leaking, cracking, or breaking. Simple, easy to use replacement.
– High quality UV Stabilised plastic
– Heavy duty PN9 pressure rating
– Smooth interior walls result in high flow
– Chemical resistant
– Easy to install
– Suits 50mm pipeSKU: 50mm2 -
HIGH BAY LIGHTS
HiClean LED High Bay Light HB04-200W
i. Beam angle: 90 & 120 degrees
ii. Intelligent light system for your industrial, Sports or Assembly areas
iii. Green, energy savings, long and reliable life of 100,000 hours
iv. No RF interference, No IR/UV radiation, no mercury pollution
v. Wide color availability in degrees Kelvin(K), 3000, 4000, 5000K
vi. Superior Uniformity; Superior Temperature Stability
vii. Temperature tested for the toughest conditions
viii. Environmental friendly, energy savings (to 90%),
ix. Special circuit design, each LED work separately, avoiding the single broken
x. LED influence problem
xi. Control options – Occupancy/DALI, 1-10V Dimming, Wireless,
and Daylight Sensor
xii. DLC Listed, UL, SAA, CE, ENEC, GS, SASO, DMark, EMC, ROHS Approved
xiii. This high bay is suitable for fresh and frozen meat processing plants,
fruit and vegetable processing and canning facilities.
xiv. Equal to 400-600W HID
xv. Luminous Flux – 19,500lmSKU: luceco high bay2 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
50mm x 4Core Armoured Cable (Kablemetal Nexans Nigeria)
50mm 4 Core Armoured Cable is a large and specific size of Armoured Cable, primarily found within large powered networks whilst also carrying power to a range of different powered devices. Although this cable can be used for domestic uses such as powering outdoor sheds and greenhouses as well as water features and outdoor lights, due to its size, it is commonly found within more industrial installations such as power stations and large construction sites.
The cable is constructed itself from the following; Plain Annealed Stranded Copper for the cores/conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing & steel wire for the armour protecting the layers beneath.
The steel wire armour within the cable also provides a mechanical protection, therefore it enables the cable higher pulling loads, which is useful for when the cable is being dispensed from a large drum.
No. of cores / size of cable – 4
Approx overall diameter – 31.3mm
Approx weight (m) – 2.95Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Used primarily within large powered networks supplying mains electricity to multiple devices.
Voltage Rating: 600/1000VtSKU: 1520
There are no reviews yet.