Weight | 2 kg |
---|
ABB 200KVA 33/400KV Distribution Transformer
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
₦18,879,146.87
CompareBased on 0 reviews
Be the first to review “ABB 200KVA 33/400KV Distribution Transformer”
-
SOLAR POWERED
Solar Power Systems 200W/36V
*solar panel: 200W/36V
*battery: 12V/100AH *2
*controller: 24V/10A
*inverter: 24V/500W sine wave * Multiple AC and DC output interface to achieve multiple
purposes: 1*24V DC,1*20V DC, 2*12V DC, 1* 9V DC,
2*5V USB, 3* 220V AC.
*Electricity generated per day: Approximately 0.6KWH in
sunny weather. * Electricity consumed per day: Maximum power
consumption 1.8 KWH.
*Total power consumption of loads should not exceed
400W per hour *AC
Adapter : Input AC100-240V,output DC28V/8A, by
option.SKU: 1555 -
ELECTRICAL FITTINGS, Electro, TRUNCKING
50x50mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 411 -
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
Standard 400Amps Changeover Switch
Features:
DMC terminal blocks are provided for cable termination having excellent mechanical, thermal and dielectric properties.
Side Handle Operation.
The enclosure is made of sheet steel suitable for individual mounting.
Terminals suitable for both Al. & Cu conductors.
Adequate knockouts provided for entry of cables.
Door interlocking facility provided.
mounting holes for switch ratings upto 320A and mounting brackets
for switch rating of 400A and above.SKU: Standard400
There are no reviews yet.