Execution: Single pole, Double pole, Three pole, Four pole, SPN,TPN
Range: 10,15,20,30,40,63,80,100,125 etc Amp
Trip Free mechanism10KA short circuit breaking capacity for B and C Low power consumption,thus cost effective and energy savingFinger safe terminal IP20 degree of protectionDual Terminal Facility15 Plate Arc chute for effective arc quenchingsilver graphite contacts for enhance lifeAccessories switchPerformance and safetyPositive contact indicatorReliability and continuity of serviceSuitable for both DESB and switch boardShort Circuit breaking capacity 3KA MCBProtection against overload and short Circuit breaking capacity 3KA
₦20,000.00
CompareExecution: Single pole, Double pole, Three pole, Four pole, SPN,TPN
Range: 10,15,20,30,40,63,80,100,125 etc Amp
Product Features
IP65 highbay with industry-leading efficacy
Multiple mounting options
Integrated heat sink
IP65 PIR sensor compatible
IP65 Integrated emergency
Stainless steel hardware
0-10V Dimmable
Supplied with 2′ of SJTW cable
1′ safety chain included
Color Temperature: 4000K, 5000K
Efficacy: Up to 160lm/W
Lumen Maintenance: L70 calculated at 100,000hrs
IP Rating: IP65
Beam Angle: 60°, 90°, 120°
MSSP manual switches consist of a snap switch combined with a thermal overload device operating on the solder-ratchet principle. The switch is designed to prevent being held closed under a sustained motor overload. To reset the overload mechanism, the switch lever is moved to the OFF position. The motor can be restarted by pushing the switch lever to the ON position. Applications include compressors, fans and pumps.
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.
There are no reviews yet.