Execution: Single pole, Double pole, Three pole, Four pole, SPN,TPN
Range: 10,15,20,30,40,63,80,100,125 etc Amp
Trip Free mechanism10KA short circuit breaking capacity for B and C Low power consumption,thus cost effective and energy savingFinger safe terminal IP20 degree of protectionDual Terminal Facility15 Plate Arc chute for effective arc quenchingsilver graphite contacts for enhance lifeAccessories switchPerformance and safetyPositive contact indicatorReliability and continuity of serviceSuitable for both DESB and switch boardShort Circuit breaking capacity 3KA MCBProtection against overload and short Circuit breaking capacity 3KA
₦20,000.00
CompareExecution: Single pole, Double pole, Three pole, Four pole, SPN,TPN
Range: 10,15,20,30,40,63,80,100,125 etc Amp
Product benefits
Output of up to 400 W
High efficiency
Long lifetime
E40 screw base for simple lamp handling
UV values significantly below the maximum permitted thresholds to IEC 61167 thanks to UV filter
Areas of application
Factories and workshops
Sports halls and multi-purpose halls
Industrial installations
Docks and port facilities
Marshaling yards, container transshipment facilities
Buildings, monuments, bridges
Approved only for use in enclosed luminaires
Outdoor applications only in suitable luminaires
Product features
POWERSTAR quartz technology
Light colors: neutral white (N), daylight (D)
Cable tray are the most common solution for supporting and routing of cables in an installation.
For this reason, cable tray are available in a variety of sizes and standards, in order to cover the
wide range of applications.
Embedded perforations for :
– extra load capacity
– better aeration
– better stability
– better condensation drainage
-50x300mm
Alternative perforations for :
– better fixation on the supports
– very useful for cable fixation
-Standard finish Galvanized
Cometstar Single Core Cables equipped with: 1. Copper Conductor 2. PVC Insulation 3. PVC Outer Sheath QUALITY WIRE WITH VALUES ; 100 PERCENT COPPER; COLOURS; BLACK,RED,BLUE/YELLOW. SIZE; 100 METERS
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
There are no reviews yet.