ABB Transformer 500KVA 11/400KV
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: 500kva
- Typical fluid: mineral oil
₦28,888,565.25
Compare-
-
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 4-6amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload1 -
WIRE CABLE TRAY & CABLE LADDER
400mm X 100mm Foreign Original Galvanized Wire Merge Cable Tray By 3 Meter
WIRE CABLE TRAY & CABLE LADDER400mm X 100mm Foreign Original Galvanized Wire Merge Cable Tray By 3 Meter
Cable tray are the most common solution for supporting and routing of cables in an installation.
For this reason, cable tray are available in a variety of sizes and standards, in order to cover the
wide range of applications.Embedded perforations for :
– extra load capacity
– better aeration
– better stability
– better condensation drainage
-50x300mmAlternative perforations for :
– better fixation on the supports
– very useful for cable fixation
-Standard finish GalvanizedSKU: tray 400 -
-
SOLAR POWERED
Solar Power Systems 200W/36V
*solar panel: 200W/36V
*battery: 12V/100AH *2
*controller: 24V/10A
*inverter: 24V/500W sine wave * Multiple AC and DC output interface to achieve multiple
purposes: 1*24V DC,1*20V DC, 2*12V DC, 1* 9V DC,
2*5V USB, 3* 220V AC.
*Electricity generated per day: Approximately 0.6KWH in
sunny weather. * Electricity consumed per day: Maximum power
consumption 1.8 KWH.
*Total power consumption of loads should not exceed
400W per hour *AC
Adapter : Input AC100-240V,output DC28V/8A, by
option.SKU: 1555
There are no reviews yet.