Three Phase(TPN) 4, 6, 8 & 12Ways MCB Protected Socket: Single Pole, Two Pole, Three Pole, Four Pole, SPN, TPN 10Amp, 15Amp, 20Amp, 32Amp, 40Amp, 50Amp, 63Amp, 80Amp, 100Amp,125Amp,200Amp etc
Eaton-MEM 6way Three Phase(TPN) Distribution Board C/W MCB
Features Compact DBs which occupy minimum space Raised neutral link for easy wiring Suitable for surface & fush mounting Detachable din bar with end stoppers for easy assembly of breakers Supplied with fully shielded bus-bars Level marks for providing indication for fitment in wall Supplied with neutral & earth link, top & bottom detachable plates Supplied with masking sheet to protect components from cement during plastering
₦378,000.00
CompareBased on 0 reviews
Be the first to review “Eaton-MEM 6way Three Phase(TPN) Distribution Board C/W MCB”
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
70mm x 4Core Amroured Cable (Nigerchin Cable and Wire)
70mm 4 Core Armoured Cable is a size and type of steel wire armoured cable. Primarily found in large powered networks and underneath roadways supplying mains electricity to large buildings. It can also be found within the transport industry, specifically railways powering the trains and buildings located beside the tracks. Due to the size of this cable, it is perfectly suitable for large amounts of power running through it on a daily basis, 24 hours a day.
The best solution to this issue would be to buy a length of earth cable that matches the length of the Armoured Cable. This would negate the steel wire from being used as an earth, meaning it is a safer alternative.
70mm 4 Core Armoured Cable is constructed from the following materials;
– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
No. of cores / size of cable – 4
Approx overall diameter – 36.8mm
Approx weight (m) – 4.23Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel Wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Primarily found in large powered networks as well as buried underneath roads supplying mains electricity to large buildings etc.
Voltage Rating – 600/1000VtSKU: 70mmnigerchin -
Electro, ENERGY SAVING BULBS, LIGHT BULBS, LIGHTING
Torch E27(Screw) 18W Energy Saving Bulb
Specifications:
• Optional wattage: 7-105W
• Operating voltage: 110 to 130V or 220 to 240V
• Frequency: 50/60Hz
• Average lifetime: 6000hrs/8000 hrs/10000hrs available
• Optional base: E27/B22/E14
• Optional Color Temperature: 2,700K/4,100K/6,500KApplications:
Shopping malls, table lamps, pendent lamps, supermarkets, restaurants, shops, hotels etc.SKU: 868 -
SOLAR POWERED
Solar Rechargeable Light
1. Power source: AC100~240V or DC 9V;
2.Rechargeable battery: 6V/4.5AH maintenance-free Lead-acid
battery
3. Lighting source : with 36pcs super bright LED; 4. Charging time: 12 hours approx. by AC charging adaptor,
and 15 hours approx. in the strong sunlight by solar panel;
5. Duration time: about 48 hours approx after being fully
charged at low mode and 24 hours at high mode; 6. USB output: DC 5V/500MA, cell phone or MP3 charged
when the battery voltage over 6V; 7. Outer shell : ABS plastic; 8. Charging mode : a. AC rechargeable adaptor; b. Solar panel:
3W/9V or 3W/12V mono or poly crystalline silicon solar
panel;SKU: 1550 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 1.6 – 2.5amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload3
There are no reviews yet.