3amp fuses for use in appliances up to 720w. 4 per pack.
Based on 0 reviews
Be the first to review “Fuses 3 Amp”
-
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 7 – 10amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload4 -
Electro, SOCKETS, SOCKETS & SWITCHES
13A Legrand Socket Outlet – 1 Gang Switched
BRITISH STANDARD SOCKET OUTLET BELANKO –
1 GANG SP SWITCHED – 13 A – 250 V~
Colour: White T084
Material: Thermoplastic with glossy finish
Dimensions: 86 x 86 x 9.5 mm (1 gang)
Supplied with 2 screws M3.5 for BS boxes
SKU: Legrand1 -
INDOOR LIGHTS, MODULAR FITTING
BSN LED Panel Light 600 x 600mm 42watt
Product benefits: – Ultra Slim, Contemporary & Elegant Design – Higher Light Transmission Rate – Exterior shell, cannot be easily damaged – No infrared, does not attract flies – Easy to install – No Lead or Mercury content – Environment friendly – Dimmable options available in selected models Applications: – Office Lighting – Conference Halls – Hospitals – Hotels – Shopping Malls – Showroom and lobby cabin etc. – Kitchen and Domestic Lighting
SKU: BSN1
There are no reviews yet.