- ✔ Perfect replacement for an up to 140W fluorescent fixture. Energy saving high quality LED SMD Floodlight will significantly reduce your energy bills
- ✔ UL Listed – the quality is confirmed with major US certificates
- ✔ Suitable for wet locations and can be used in a wide temperature range (-40 -+122 F)
- ✔ 50,000 hour lifetime, no maintenance required – just install it and enjoy bright, consistent light for many years. 5 year warranty; 20W; 4000K; 1600Lm; Voltage Range 100-277V
Based on 0 reviews
Be the first to review “Led Flood Light 30W SMD Outdoor Waterproof”
-
SOLAR POWERED
Solar Power Systems 150W/36V
*solar panel: 150W/36V *2
*battery: 12V/100AH *4
*controller: 24V/15A
*inverter: 24V/600W sine wave * Multiple AC and DC output interface to achieve multiple
purposes: 1*24V DC,1*20V DC, 1*12V DC, 2*5V USB,
3* 220V AC..
*Electricity generated per day: Approximately 0.9KWH in
sunny weather. * Electricity consumed per day: Maximum power
consumption 3.6 KWH.
*Total power consumption of loads should not exceed
480W per hour
*AC Adapter : Input AC100-240V,output DC28V/8A, by
option.SKU: 1556 -
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1 -
ELECTRICAL FITTINGS, Electro, MODULAR FITTING
600×1200 Recessed Modular Fitting
Modular Fitting has an extremely small recess depth 53mm which makes it perfect for shallow ceiling voids. It is also suitable for lay in suspended grid ceilings and comes complete with wire retention safety cable. Rapid installation and maintenance are further facilitated by a quick release louvre device, which is particularly useful during potentially disruptive lamp changes. Ivy Classic is also supplied with a peel off protective cover, to keep the luminaire bright, clean and dust free during carriage and installation.
SKU: 670
There are no reviews yet.