The Clipsal C-Bus system is a microprocessor based wiring system to control lighting and other electrical services. From on/off control of a lighting circuit to analogue type control, Such as dimming electronic fluorescent ballasts, C-Bus can control and automate virtually any type of electrical load
Legrand CLIPSAL SWITCH 1 GANG – 30Amps
Key Features:
1 gang
Rockers are a long throw momentary action type
C-bus learn enabled
LED button indicators provide illumination and status feedback
Night light feature
Fall back level option to dim indicators at a set time after the last button press
Mounted using standard mounting accessories
₦6,600.00
CompareBased on 0 reviews
Be the first to review “Legrand CLIPSAL SWITCH 1 GANG – 30Amps”
-
ELECTRICAL INDUSTRIAL, TRANSFORMER
ABB Transformer 500KVA 11/400KV
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: 500kva
- Typical fluid: mineral oil
SKU: dts50011 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
6mm x 4Core Armoured Cable (Kablemetal Nexans Nigeria)
Suitable for under and over-ground usage alike, 6mm 4 Core Armoured Cable is a dust and waterproof variant of electrical cable that is commonly found within powered networks and supplying mains electricity to a large variety of devices, both domestic and industrial.
This particular type of cable is constructed using Plain Annealed Stranded Copper for the conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing and Steel Wire for the armouring.
Not only does the Steel Wire Armour provide a method of mechanical protection, meaning it is suitable for installation into highly-corrosive environments, the armour also provides a form of CPC (Circuit Protective Conductor) meaning it can be used as an earth for the cable. This means that an earth core/cable is not required although it is still recommended as an extra safety measure.
No. of cores / size of cable – 4
Approx overall diameter – 18.7mm
Approx weight (m) – 0.75Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating – 600/1000VtSKU: 14517 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
2.5mm x 4Core Armoured Cable (Nigerchin WIRE AND CABLE)
NIGERCHIN was incorporated in 1970 as the pioneer manufacturer of electric cables and conductors in Nigeria.
A partnership with Canada Wire and Cable International (CWI), then, a Canadian company with over 75 years experience in cable designed, engineering and manufacture, gave Nigerchin relevant technology, experience and facilities for product and manpower development.
Over time, Nigerchin has built on this foundation, competency for upgrading, producing and certifying quality products that meet international requirements in the electrical power industry and installations.
2.5mm 4 Core Armoured Cable is commonly found supplying mains voltage electricity to powered devices and networks. For example, it could be used to power outdoor buildings such as garden sheds or workshops as well as garden features such as jacuzzi/hot tubs.
The cable contains a steel wire armour, meaning it provides a mechanical protection for the insulating layers underneath. This also enables the cable to have higher pulling loads, making it perfectly suitable for dispensing from a cable drum on a building site, etc.
It’s construction is commonly identified by the plain annealed stranded copper for the cores, the PVC (Polyvinyl Chloride) for the bedding and sheathing, armour made from steel wire and XLPE (Cross-Linked Polyethylene) for the insulation.
The Steel Wire can also be used as a CPC (Circuit Protective Conductor), meaning the armour can be used an earth for the cable. This means that even though the cable has an earth core, it is still protected, meaning it abides by all health and safety regulations.
No. of cores / size of cable – 4
Approx overall diameter – 15.3mm
Approx weight (m) – 0.43Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: – 600/1000VtSKU: 2.5mm nigerchin -
ELECTRICAL INDUSTRIAL, Electro, RECLINE CABLES
95mm x 4core Recline Cable|Per Meter – Kabelmetal Nigeria
ELECTRICAL INDUSTRIAL, Electro, RECLINE CABLES95mm x 4core Recline Cable|Per Meter – Kabelmetal Nigeria
Today, Nexans Kabelmetal Nigeria Plc is the most advanced cable manufacturer in the West Africa Sub Saharan region. As an innovator in cable products in Nigeria, we serve a wide range of industry groups, including oil and gas, manufacturing, process, business and residential construction and of course power utilities. Our product range covers low voltage power, instrumentation and control cables. Cables for power distribution and several special cables supplement our product portfolio.
SKU: kabel7
There are no reviews yet.