The Clipsal C-Bus system is a microprocessor based wiring system to control lighting and other electrical services. From on/off control of a lighting circuit to analogue type control, Such as dimming electronic fluorescent ballasts, C-Bus can control and automate virtually any type of electrical load
Legrand CLIPSAL SWITCH 1 GANG – 30Amps
Key Features:
1 gang
Rockers are a long throw momentary action type
C-bus learn enabled
LED button indicators provide illumination and status feedback
Night light feature
Fall back level option to dim indicators at a set time after the last button press
Mounted using standard mounting accessories
₦6,600.00
CompareBased on 0 reviews
Be the first to review “Legrand CLIPSAL SWITCH 1 GANG – 30Amps”
-
INDOOR LIGHTS
AEG LED BULB 7WATT
Features:
1. Super low power consumption with maximum brightness
2. Ultra small size for easy installation
3. High energy saving for better efficiency
4. Smart thermal design to improve air circulation
5. Designed life hour: >40,000hrs
6. Environmental friendly reduces pollution
7. Reinforced plastic and metal bodyApplication
1. Indoor lighting
2. Home
3. OfficeSKU: AEG1 -
SOLAR POWERED
Solar Fan With Radio
1.Rechargeable LED light:32pcs high brightness LED lamp as table lamp which can be lighting above 8 hours at high mode and 22 hours at low mode;
2.FM Radio: The machine equipped with a stereo FM radio,allow you to enjoy the airwaves to bring the fun anytime,aywhere;
3.Air Fan: a.Provide wind in hot weather.b Speed:6000rpm c.Power:2.3W,Input Current:70mA;
4.Battery:3.7V 4000mAH lithium battery;
5.Charging time:a.About 10 hours by solar panel b.About 12 hours by AC adaptor;
6.Recharge every three months if the light is not used for a long time.SKU: 1530 -
CABLE AND CABLE MANAGEMENT, Electro, FLEXIBLE WIRE
4mm x 4core Flex Cable – Coleman 100 meters
4mm X 4Core Flexible cable is the ideal cable for the installation of submersible pump and the like devices. It can as well be used to power Air-Conditioner. It is highly conductive and durable. It is 100% pure copper, 100meter long and full guage of 4mm.
SKU: coleman 4mm flex -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 1.6 – 2.5amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload3 -
Electro, ENERGY SAVING BULBS, LIGHT BULBS, LIGHTING
Torch B22 (Pin) 65W Energy Saving Bulb
Specifications:
• Optional wattage: 7-105W
• Operating voltage: 110 to 130V or 220 to 240V
• Frequency: 50/60Hz
• Average lifetime: 6000hrs/8000 hrs/10000hrs available
• Optional base: E27/B22/E14
• Optional Color Temperature: 2,700K/4,100K/6,500KApplications:
Shopping malls, table lamps, pendent lamps, supermarkets, restaurants, shops, hotels etc.SKU: 864
There are no reviews yet.