The Clipsal C-Bus system is a microprocessor based wiring system to control lighting and other electrical services. From on/off control of a lighting circuit to analogue type control, Such as dimming electronic fluorescent ballasts, C-Bus can control and automate virtually any type of electrical load
Legrand CLIPSAL SWITCH 1 GANG – 30Amps
Key Features:
1 gang
Rockers are a long throw momentary action type
C-bus learn enabled
LED button indicators provide illumination and status feedback
Night light feature
Fall back level option to dim indicators at a set time after the last button press
Mounted using standard mounting accessories
₦6,600.00
CompareBased on 0 reviews
Be the first to review “Legrand CLIPSAL SWITCH 1 GANG – 30Amps”
-
ACCESSORIES
Isolator, Gang Operated 33kVA
Structure: Three-column Disconnector
Type: High-voltage
Installation: Outdoor High-voltage
Grounding Mode: Grounding
Number of Poles: Three Pole
Series: Three
Movement Mode: Horizontal Rotary Type
Grounding: Single Ground
Run: Turn the HorizontalSKU: isolator2 -
Uncategorized
External SSD USB 3.1 750 GB
- Intel Core i5 processors (13-inch model)
- Store all of your data with a large capacity
- Store all of your data with a large capacity
Enjoy blazing-fast read/write speeds - Enjoy a compact and lightweight design
- Force Touch trackpad (13-inch model)
SKU: 5487FB8/38 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 2.3-4amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload2 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
6mm x 4Core Armoured Cable (Kablemetal Nexans Nigeria)
Suitable for under and over-ground usage alike, 6mm 4 Core Armoured Cable is a dust and waterproof variant of electrical cable that is commonly found within powered networks and supplying mains electricity to a large variety of devices, both domestic and industrial.
This particular type of cable is constructed using Plain Annealed Stranded Copper for the conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing and Steel Wire for the armouring.
Not only does the Steel Wire Armour provide a method of mechanical protection, meaning it is suitable for installation into highly-corrosive environments, the armour also provides a form of CPC (Circuit Protective Conductor) meaning it can be used as an earth for the cable. This means that an earth core/cable is not required although it is still recommended as an extra safety measure.
No. of cores / size of cable – 4
Approx overall diameter – 18.7mm
Approx weight (m) – 0.75Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating – 600/1000VtSKU: 14517
There are no reviews yet.