In 1927, MEM embarked on a new field of manufacture – motor control gear, to meet the increasing use of electric motors in industry, and in 1965 announced its first miniature circuit breaker range. Delta Metal acquires MEM in 1971 to enter the electrical sector and Delta’s Electrical Division then consolidates several divisions of MEM (250V, 500V), as well as Bill Switchgear, under the “MEM” brand in 1998 The Electrical Division of Delta was acquired by Eaton Corporation in 2003, including the MEM, Bill and Holec brands, to spearhead the drive into global markets with products designed to meet international standards
MEM – Eaton 100A TPN Gear Switch
The top and bottom endplates are removable. Door can be removed for ease of installation. Incorporate knockouts and gasketed doors, IP41 rated protection. Handle: chromium-plated handles with ON (I) / OFF (O) indication. The switch can be locked ON or OFF by means of a padlock. Internal fixing: enables the unit to be mounted side by side with other units. Maximum current: 100A Number of Poles: 3 Poles. 3 Phase. Switches: quick make-and-break type, suitable for use on AC or DOC. Removable moving contact assemblies: to facilitate wiring. Interiors comprise porcelain bases fitted with non-ferrous conducting components.
₦258,000.00
CompareBased on 0 reviews
Be the first to review “MEM – Eaton 100A TPN Gear Switch”
-
ELECTRICAL INDUSTRIAL, Electro, TRANSFORMER
ABB 200KVA 11/400KV Distribution Transformer
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
SKU: transfor200kva -
HIGH BAY LIGHTS
Luceco LED Highbay Light LHBR 150W (23100lm)
Product Features
IP65 highbay with industry-leading efficacy
Multiple mounting options
Integrated heat sink
IP65 PIR sensor compatible
IP65 Integrated emergency
Stainless steel hardware
0-10V Dimmable
Supplied with 2′ of SJTW cable
1′ safety chain includedColor Temperature: 4000K, 5000K
Efficacy: Up to 160lm/W
Lumen Maintenance: L70 calculated at 100,000hrs
IP Rating: IP65
Beam Angle: 60°, 90°, 120°SKU: luceco150w -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
16mm x 4 Core Amroured Cable (Kablemetal Nexans Nigeria)
16mm 4 Core Armoured Cable is a variant of electrical cable that has a cross-sectional diameter of 16mm as well as a Live and Neutral core within the cable itself.
The construction of this cable is commonly identified by the plain annealed stranded copper used for the conductors/cores, cross-linked polyethylene (XLPE) for the insulation, PVC (Polyvinyl Chloride) for both the bedding and sheathing and steel wire for the armour protecting the insulating layers beneath.
The steel wire armour also provides a form of mechanical protection, which means that it has higher pulling loads making it suitable for being dispensed from large cable drums. As well as providing mechnical protection, it also ensures that the cable can withstand highly corrosive environments such as being installed underground as well as being attached to outdoor walls and structures using Cable Cleats.
16mm 4 Core Armoured Cable is found in a wide range of industries across the globe. Some examples of the most common ones are:-
– The transport industry
– Railway industry
– Underneath roads carrying mains electricity to buildings
– Cable Ducting within warehouses.
No. of cores / size of cable – 4
Approx overall diameter – 23.6mm
Approx weight (m) – 1.3Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: 600/1000SKU: 1519 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
35mm x 4Core Armoured Cable Coleman
Suitable for under and over-ground usage alike, 35mm 4 Core Armoured Cable is a dust and waterproof variant of electrical cable that is commonly found within powered networks and supplying mains electricity to a large variety of devices, both domestic and industrial.
This particular type of cable is constructed using Plain Annealed Stranded Copper for the conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing and Steel Wire for the armouring.
Not only does the Steel Wire Armour provide a method of mechanical protection, meaning it is suitable for installation into highly-corrosive environments, the armour also provides a form of CPC (Circuit Protective Conductor) meaning it can be used as an earth for the cable. This means that an earth core/cable is not required although it is still recommended as an extra safety measure.
No. of cores / size of cable – 4
Approx overall diameter – 18.7mm
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating – 600/1000VtSKU: coleman35mm
There are no reviews yet.