In 1927, MEM embarked on a new field of manufacture – motor control gear, to meet the increasing use of electric motors in industry, and in 1965 announced its first miniature circuit breaker range.
Delta Metal acquires MEM in 1971 to enter the electrical sector and Delta’s Electrical Division then consolidates several divisions of MEM (250V, 500V), as well as Bill Switchgear, under the “MEM” brand in 1998
The Electrical Division of Delta was acquired by Eaton Corporation in 2003, including the MEM, Bill and Holec brands, to spearhead the drive into global markets with products designed to meet international standards
MEM – Eaton 800A TPN Gear Switch
The top and bottom endplates are removable. Door can be removed for ease of installation.
Incorporate knockouts and gasketed doors, IP41 rated protection.
Handle: chromium-plated handles with ON (I) / OFF (O) indication. The switch can be locked ON or OFF by means of a padlock.
Internal fixing: enables the unit to be mounted side by side with other units.
Maximum current: 800A
Number of Poles: 3 Poles. 3 Phase.
Switches: quick make-and-break type, suitable for use on AC or DOC.
Removable moving contact assemblies: to facilitate wiring.
Interiors comprise porcelain bases fitted with non-ferrous conducting components.
₦2,350,000.00
CompareBased on 0 reviews
Be the first to review “MEM – Eaton 800A TPN Gear Switch”
-
ACCESSORIES
APC 700 VA UPS
APC Back-UPS 700VA, 230V, AVR, IEC Sockets
Battery Backup & Surge Protector for Electronics and Computers
Includes : User Manual1. Automatic Voltage Regulation (AVR): Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
2. Telephone dataline surge protection: Provides protection of connected equipment from power surges traveling on telephone lines.
3. USB connection: Use your PC to access additional power protection and management features for your UPS via a USB Port.
4. LED status display: Quickly understand unit and power status with visual indicators.
5. Audible alarms: Provides notification of changing utility power and UPS power conditions
6. Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
7. Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
8. Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
9. Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.SKU: APC700 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
2.5mm x 4Core Armoured Cable (Nigerchin WIRE AND CABLE)
NIGERCHIN was incorporated in 1970 as the pioneer manufacturer of electric cables and conductors in Nigeria.
A partnership with Canada Wire and Cable International (CWI), then, a Canadian company with over 75 years experience in cable designed, engineering and manufacture, gave Nigerchin relevant technology, experience and facilities for product and manpower development.
Over time, Nigerchin has built on this foundation, competency for upgrading, producing and certifying quality products that meet international requirements in the electrical power industry and installations.
2.5mm 4 Core Armoured Cable is commonly found supplying mains voltage electricity to powered devices and networks. For example, it could be used to power outdoor buildings such as garden sheds or workshops as well as garden features such as jacuzzi/hot tubs.
The cable contains a steel wire armour, meaning it provides a mechanical protection for the insulating layers underneath. This also enables the cable to have higher pulling loads, making it perfectly suitable for dispensing from a cable drum on a building site, etc.
It’s construction is commonly identified by the plain annealed stranded copper for the cores, the PVC (Polyvinyl Chloride) for the bedding and sheathing, armour made from steel wire and XLPE (Cross-Linked Polyethylene) for the insulation.
The Steel Wire can also be used as a CPC (Circuit Protective Conductor), meaning the armour can be used an earth for the cable. This means that even though the cable has an earth core, it is still protected, meaning it abides by all health and safety regulations.
No. of cores / size of cable – 4
Approx overall diameter – 15.3mm
Approx weight (m) – 0.43Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: – 600/1000VtSKU: 2.5mm nigerchin -
ELECTRICAL INDUSTRIAL, TRANSFORMER
ABB Transformer 1500KVA 33/400KV
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
SKU: DTS150033
There are no reviews yet.