Complete range of 0.6m, 1.2m, 1.5m.Up to 70%~80% Energy-saving. Work without external ballast, Instant soft-start.No RF interference, No flickering or buzzing.Quick and easy installation to minimize retrofit costs. No Mercury and other hazardous materials, fully RoHS-compliant. ●Typical energy efficiency(1.2m): 1550lm@2700K@18W (>80lm/W);1700lm@4000K@18W (>90lm/W);1800lm@6000K@18W (>100lm/W) . ● Universal voltage: AC90-277V. ● Harmonic distortion 0.9. ● Uniform light output. ● Single end electricity & high safety. ● Almost zero UV&IR emissions
Osram LED T8 SubstiTUBE Value 1200mm (4ft)
Product family features
- T8 LED tube made of glass with G13 base
- Mercury-free and RoHS compliant
- Luminous efficacy: up to 86 lm/W
- Type of protection: IP20
Product family benefits
- High color homogeneity
- Energy savings of up to 68 % compared to conventional 1,500 mm T8 fluorescent lamp
- Instant flickerfree starting
Areas of application
- Corridors, stairways, parking garages
- Cooling and storage rooms
- Warehouses
- Domestic applications
- General illumination within ambient temperatures from –20…+45 °C
Equipment / Accessories
- Suitable for operation on magnetic control gear
Legal advice
When used to replace a T8 fluorescent lamp the total energy efficiency and light distribution depends on the design of the lighting system.
₦14,850.00
CompareBased on 0 reviews
Be the first to review “Osram LED T8 SubstiTUBE Value 1200mm (4ft)”
-
Electro, SOCKETS, SOCKETS & SWITCHES
Eaton MEM 15 Amp Socket
Eaton’s Moulded Accessory Range is manufactured in a robust, high quality thermoplastic. The range offers a comprehensive selection of solutions that combine reliability and durability with quick and simple installation. Designed with colour matching and aesthetics in mind, the range boasts an appealing front plate design. This enables easy side-by-side mounting of switches and sockets. Screw caps are provided to conceal fixing screws to give a clean finish.
Material: PVC Color: white. Number of gangs:1 Socket: 3 pin plug Amps: 15A.
SKU: 1502 -
SOLAR POWERED
Solar Charger
1. Output voltage/current: USB1: 5V 1A(MAX); USB1: 2.5V 2.1A(MAX).
2. Input voltage/current: 5V 1A(MAX).
3. Specification of solar panel: 2.7W/6V.
4. Material of solar panel: mono-crystalline, with 17% efficiency.
5. Inbuilt high capacity polymer lithium battery: 10000mah.
6. Charging time by AC adaptor: 12H.
7. Computer charging time: 24H.SKU: 1537 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 7 – 10amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload4 -
TRUNCKING
40 x 25mm PVC Trunking
* N450.00 (per length)
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 1497
There are no reviews yet.