Our Retro Dome white spotlight rail features two horizontal arms which each house two headlamp-style directional spotlights. Easy to angle, these four lights can be manoeuvred in order to light up every corner of your room from one central ceiling fitting. The indoor ceiling light has a glossy white finish so classic and simple it will never go out of style, making it perfect for kitchens, living rooms, dining rooms and hallways alike. The light has a 16cm drop and a width of 81cm and requires mains supply, wiring and some assembly, for which full instructions are provided. This spotlight rail takes four GU10 50W spot bulbs, which are included. Please note: this light fitting is not suitable for bathrooms. Four head, ceiling spotlight bow. Maximum 4x 50W GU10 halogen bulbs, included. Wiring required.
Spotlight Ceiling Light White
For indoor use only. Always read instructions.
₦0.00
CompareBased on 0 reviews
Be the first to review “Spotlight Ceiling Light White”
-
SOLAR POWERED
Solar – SZYL-SCL-N803
1. Solar panel: 5W/6V.
2. Lithium battery: 3.7 V/4000 mAh (bottom), 7V/2000mAh (top).
3. Lighting time (top): About 18 hours at low mode, about 10 hours at high mode; Lighting time (bottom): About 30 hours at low mode, About 16 hours at high mode.
4. USB output: 5V/0.5A, 5V/1.5A.
5. Charging time: 5 hours by 5W solar panel.
6. Multi-function: Mosquito Repellent, FM-Radio, MP3-Play, Manual generator device, Mobile charger.SKU: 1532 -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
4way Single Phase Eaton-MEM Consumer Unit Distribution Board C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro4way Single Phase Eaton-MEM Consumer Unit Distribution Board C/W MCB
These are most elegantly designed DBs, to suit the decor of homes Raised neutral link for easy wiring Spring loaded outer cover swings open by just pressing the lock as in case of Elegance series. Supplied with masking sheet to protect components from cement during plastering Supplied with neutral & earth link, top & bottom detachable plates
SKU: 252 -
ELECTRICAL INDUSTRIAL, Electro, LADDERS
Ladders With Self Supported Trestle
Product Features:
Wide fiberglass channel for grip and extra strength
Aluminum steps reduce overall weight without reducing protection level
D-rung ribbed steps offer flat surface climbing area for effortless climbing
Rung crimped onto stile for robustness and strength
Heavy duty PVC shoes provide greater grip and are non-markingSuited for electrical works:
Maintenance
Installation
Telecom Sectors
Electricity ProvidersSKU: 305 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 1.6 – 2.5amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload3
There are no reviews yet.