TeSys LR9D and LR9F electronic overload relays provide simple, flexible and reliable motor protection.
TeSys Schneider Electric Overload Relays 4-6amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.
₦10,500.00
CompareBased on 0 reviews
Be the first to review “TeSys Schneider Electric Overload Relays 4-6amps”
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
4mm x 4 Core S.W.A/P.V.C Armoured Cable (Nigerchin WIRE AND CABLE)
ARMOURED CABLE, ELECTRICAL INDUSTRIAL4mm x 4 Core S.W.A/P.V.C Armoured Cable (Nigerchin WIRE AND CABLE)
NIGERCHIN was incorporated in 1970 as the pioneer manufacturer of electric cables and conductors in Nigeria.
A partnership with Canada Wire and Cable International (CWI), then, a Canadian company with over 75 years experience in cable designed, engineering and manufacture, gave Nigerchin relevant technology, experience and facilities for product and manpower development.
Over time, Nigerchin has built on this foundation, competency for upgrading, producing and certifying quality products that meet international requirements in the electrical power industry and installations.
4mm 4 Core Armoured Cable is a form of electrical cable that has the ability to supply mains electrical power to devices and networks. The cable also has more domestic uses such as being used to supply mains electricity to devices such as outdoor buildings, for example, garden sheds or out-houses, as well as being suitable for outdoor lighting circuits such as patio and decking lights.
The cable construction is identified by plain annealed stranded copper being used for the conductors/cores, PVC (Polyvinyl Chloride) being used for the bedding and sheathing, cross-linked polyethylene being used for the insulation and steel wire being used for the armour.
Due to the steel wire armour that is within the cable protecting the insulating layers beneath, it is also used to give the cable higher pulling loads, meaning it can take the strain of being dispensed from cable drums when delivered to a building/construction site etc. The steel wire armour can also be used as a CPC (Circuit Protective Conductor) or ‘natural earth’ meaning that the armour itself will earth the cable.
No. of cores / size of cable – 4
Approx overall diameter – 16.4mm
Approx weight (m) – 0.54Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: 600/1000VtSKU: 4mm Nigerchin -
WIRE CABLE TRAY & CABLE LADDER
150mm X 50mm Foreign Original Galvanized Wire Merge Cable Tray By 3 Meter
WIRE CABLE TRAY & CABLE LADDER150mm X 50mm Foreign Original Galvanized Wire Merge Cable Tray By 3 Meter
Cable tray are the most common solution for supporting and routing of cables in an installation.
For this reason, cable tray are available in a variety of sizes and standards, in order to cover the
wide range of applications.Embedded perforations for :
– extra load capacity
– better aeration
– better stability
– better condensation drainage
-50x300mmAlternative perforations for :
– better fixation on the supports
– very useful for cable fixation
-Standard finish GalvanizedSKU: GAL150 -
ELECTRICAL FITTINGS, Electro, MODULAR FITTING
600×1200 Recessed Modular Fitting
Modular Fitting has an extremely small recess depth 53mm which makes it perfect for shallow ceiling voids. It is also suitable for lay in suspended grid ceilings and comes complete with wire retention safety cable. Rapid installation and maintenance are further facilitated by a quick release louvre device, which is particularly useful during potentially disruptive lamp changes. Ivy Classic is also supplied with a peel off protective cover, to keep the luminaire bright, clean and dust free during carriage and installation.
SKU: 670
There are no reviews yet.