threaded rod have a thread cut entirely along them. Cut sections of them can be used in the fabrication/installation of trapezes, or to hang other components. The rod itself can be supported with products such as drop-in anchors or other hangers.
Threaded Rod by 2.2mtrs
Threaded rod have a thread cut entirely along them. Cut sections of them can be used in the fabrication/installation of trapezes, or to hang other components. The rod itself can be supported with products such as drop-in anchors or other hangers.
₦2,000.00
CompareBased on 0 reviews
Be the first to review “Threaded Rod by 2.2mtrs”
-
Electro, FLUORESENT TUBES, LIGHT BULBS, LIGHTING
Osram Fluorescent Tube 2ft
Product benefits: Proven lamp technology Good economy thanks to high efficiency Available in many different light colors (2,700…8,000 K) for various applications Areas of application: Public buildings Office lighting Industry Shops Supermarkets and department stores Street lighting Outdoor applications only in suitable luminaires Product features: Very good lumen maintenance: 90 % throughout the service lifetime of the lamp Good color rendering group: 1B (Ra: 80…89) Dimmable Top-quality three-band phosphor: LUMILUX
SKU: OsramFlu2 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
70mm x 4Core Armoured Cable – Coleman
Suitable for under and over-ground usage alike, 70mm 4 Core Armoured Cable is a dust and waterproof variant of electrical cable that is commonly found within powered networks and supplying mains electricity to a large variety of devices, both domestic and industrial.
This particular type of cable is constructed using Plain Annealed Stranded Copper for the conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing and Steel Wire for the armouring.
Not only does the Steel Wire Armour provide a method of mechanical protection, meaning it is suitable for installation into highly-corrosive environments, the armour also provides a form of CPC (Circuit Protective Conductor) meaning it can be used as an earth for the cable. This means that an earth core/cable is not required although it is still recommended as an extra safety measure.
No. of cores / size of cable – 4
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating – 600/1000VtSKU: coleman70mm -
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
STANLEY 800A Changeover
Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. Our new range products in sheet metal Side Handle Operating Changeover are made as per industrial requirements with powder coating.
This certificate of “Stanley” original products, issued with the assurance as the same has been manufactured in accordance with requirement of IEC-60947-3 (2005-06). Quality system, standards and mechanism has been tested satisfactory to the specific test as follows:
1. Dielectric Test
2. Mechanical Operation Test
3. High Voltage Test
4. Insulation Resistance Test
5. Temperature Rise Test
6. Mini Volt Drop TestSTANLEY 800A Changeover
SKU: S800 -
MOTOR STARTER
Three Phase Motor Starter 12-18A
General Description:
Motor starter are suitable for 50Hz or 60Hz, rated voltage up to 660V, current up to 95A circuit. In order to protect motor starting, accelerating the motor to rated rev, against overload operation and artificially breaking the circuit of protected motor.
Structure Feature:
1. Sealed: Plastic box LE1-D09~D32 and iron box platstic coated LE1-D40~D95, protection up to IP65;
2. Operation system with manual “START” and “STOP” buttons. With thermal overload relay consisting a inversable starter;
3. Install different accessories derive many kinds of other products;
4. Select LC1-D contactor with standard 35mm rail, which can be fixed directly at the base of starter. Wires extracted from the three phase of the thermal overload relay can be inserted the three phase main contacts of the contactor, easy assembly and connection.SKU: 1498
There are no reviews yet.