Two gang two way switch in Georgian style brass the ultimate in elegant switch design. This product must be installed in accordance with local Building Regulations. If in any doubt, or where required by the law, consult a competent person who is registered with an electrical self certification scheme. Further information is available online or from your Local Authority. Twin, 2 way light switch. If in doubt consult a qualified electrician.
Twin Switch Brass 2 Way
Out of stock
Always read instructions.
₦2,300.00
Out of stock
CompareBased on 0 reviews
Be the first to review “Twin Switch Brass 2 Way”
-
Electro, ENERGY SAVING BULBS, LIGHT BULBS, LIGHTING
Torch E27(Screw) 85W Energy Saving Bulb
Specifications:
• Optional wattage: 7-105W
• Operating voltage: 110 to 130V or 220 to 240V
• Frequency: 50/60Hz
• Average lifetime: 6000hrs/8000 hrs/10000hrs available
• Optional base: E27/B22/E14
• Optional Color Temperature: 2,700K/4,100K/6,500KApplications:
Shopping malls, table lamps, pendent lamps, supermarkets, restaurants, shops, hotels etc.SKU: 872 -
ACCESSORIES, ELECTRICAL FITTINGS, Electro
Ceiling Rose/Pack
Spin-on/off cover with smooth cable entry Base incorporates Live, Neutral and Loop-in terminals (3 plate) Wiring aperture in base with extra knockout for ease of wiring Alternative fixing holes allow for off centre mounting Size 90mm diameter x 34mm
SKU: 1419 -
SOLAR POWERED
Solar Power Systems 100W/18V
*solar panel: 100W/18V
*battery: 12V/100AH
*controller: 12V/15A
*inverter: 12V/300W sine wave * Multiple AC and DC output interface to achieve multiple
purposes: 1*20V DC, 1*12V DC, 1* 9V DC, 1*3.3V DC,
4*5V USB, 2* 220V AC.
*Electricity generated per day: Approximately 0.3KWH in
sunny weather. * Electricity consumed per day: Maximum power
consumption 0.95 KWH.
*Total power consumption of loads should not exceed
200W per hour *AC
Adapter : Input AC100-240V,output DC16V/3-4A, by
option.SKU: 1554 -
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1
There are no reviews yet.