With its three fine curved arms and upturned frosted glass shades, our Classic three-arm antique bronze indoor ceiling light exudes understated elegance. The central fitting and three arms all have an antique bronze finish that is nostalgically sophisticated, and its white glass shades, which feature a subtle smoked patterning, give off a soft, flattering glow. The light fixture has a 35cm drop and a width of 52cm and requires mains supply, wiring and some assembly, for which full instructions are provided. This three-arm ceiling light requires three candle SES 42W regular or 11W energy saving bulbs, which are not included. Please note: this light fitting is not suitable for bathrooms. Assembly required.
York Light Fitting Ceiling Antique Brass Effect 3 Light
-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority-
₦0.00
CompareBased on 0 reviews
Be the first to review “York Light Fitting Ceiling Antique Brass Effect 3 Light”
-
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 2.3-4amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload2 -
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
STANLEY 800A Changeover
Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. Our new range products in sheet metal Side Handle Operating Changeover are made as per industrial requirements with powder coating.
This certificate of “Stanley” original products, issued with the assurance as the same has been manufactured in accordance with requirement of IEC-60947-3 (2005-06). Quality system, standards and mechanism has been tested satisfactory to the specific test as follows:
1. Dielectric Test
2. Mechanical Operation Test
3. High Voltage Test
4. Insulation Resistance Test
5. Temperature Rise Test
6. Mini Volt Drop TestSTANLEY 800A Changeover
SKU: S800 -
WIRE CABLE TRAY & CABLE LADDER
Unitrust 41 x41
Unitrust Intelok Channel is a strong, easy to erect support system, ideal for supporting cable trays, cable ladders, pipes and ducting and is adaptable for use in many other applications. The flanges on Intelok channel are serrated to give improved slip resistance over that of conventional ‘strut’ systems, particularly when Intelok channel nuts are used.
SKU: Unitrust1
There are no reviews yet.