Each Armored cable contains high strength, good bending performance, no gel, easy to be connected and operated on with buffer design, independent strength member and sheath to prevent damage from environmental and mechanical stress. Outer jacket’s colors varies according to the types of optical fibers (indoor use), black color is recommended for outdoor use, options for other colors available upon request.
1.5mm x 4Core Armoured Cable (Kablemetal)
1.5mm 4 Core Armoured Cable is a form of electrical cable, primarily found in electrical installations such as powered devices and networks, powering outdoor features such as lighting and jacuzzis, as well as industrial installations.
4 Core Cable contains brown, black, grey & blue coloured cores. It’s construction is commonly identified as steel for the wire armour, PVC for the outer sheathing and bedding, XLPE (Cross-Linked Polyethylene) for the insulation and plain annealed stranded copper for the cores.
As the cable contains a steel wire armour, this not only provides a form of mechanical protection, but can also be used an earth for the cable.
No. of cores / size of cable – 4
Approx overall diameter – 14mm
Approx weight (m) – 0.36 Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating – 600/1000Vt
₦2,950.00
CompareBased on 0 reviews
Be the first to review “1.5mm x 4Core Armoured Cable (Kablemetal)”
-
SOLAR POWERED
Solar Rechargeable Light
1. Power source: AC100~240V or DC 9V;
2.Rechargeable battery: 6V/4.5AH maintenance-free Lead-acid
battery
3. Lighting source : with 36pcs super bright LED; 4. Charging time: 12 hours approx. by AC charging adaptor,
and 15 hours approx. in the strong sunlight by solar panelï¼›
5. Duration time: about 48 hours approx after being fully
charged at low mode and 24 hours at high mode; 6. USB output: DC 5V/500MA, cell phone or MP3 charged
when the battery voltage over 6V; 7. Outer shell : ABS plastic; 8. Charging mode : a. AC rechargeable adaptor; b. Solar panel:
3W/9V or 3W/12V mono or poly crystalline silicon solar
panel;SKU: 1550 -
Electro, ENERGY SAVING BULBS, LIGHT BULBS, LIGHTING
Torch E27 (Pin) 65W Energy Saving Bulb
Specifications:
• Optional wattage: 7-105W
• Operating voltage: 110 to 130V or 220 to 240V
• Frequency: 50/60Hz
• Average lifetime: 6000hrs/8000 hrs/10000hrs available
• Optional base: E27/B22/E14
• Optional Color Temperature: 2,700K/4,100K/6,500KApplications:
Shopping malls, table lamps, pendent lamps, supermarkets, restaurants, shops, hotels etc.SKU: 871 -
Electro, GEAR SWITCHES, GEAR SWITCHES & CHANGEOVER
MEM – Eaton 63A TPN Gear Switch
The top and bottom endplates are removable. Door can be removed for ease of installation. Incorporate knockouts and gasketed doors, IP41 rated protection. Handle: chromium-plated handles with ON (I) / OFF (O) indication. The switch can be locked ON or OFF by means of a padlock. Internal fixing: enables the unit to be mounted side by side with other units. Maximum current: 63A Number of Poles: 3 Poles. 3 Phase. Switches: quick make-and-break type, suitable for use on AC or DOC. Removable moving contact assemblies: to facilitate wiring. Interiors comprise porcelain bases fitted with non-ferrous conducting components.
SKU: MEM63 -
WIRE CABLE TRAY & CABLE LADDER
Cable Tray Joiners
galvanised medium duty couplers
Couplers are required for joining together CTJ straight lengths or cut lengths of tray without the need for further drilling
CTJ standard couplers are supplied in pairs
CTJ standard coupler is supplied singlySKU: Joiner -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Powertec 4 Way 100A Three Phase(TPN) Distribution Board C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroPowertec 4 Way 100A Three Phase(TPN) Distribution Board C/W MCB
Features
Compact DBs which occupy minimum space
Raised neutral link for easy wiring
Suitable for surface & fush mounting
Detachable din bar with end stoppers for easy assembly of breakers
Supplied with fully shielded bus-bars
Level marks for providing indication for fitment in wall
Supplied with neutral & earth link, top & bottom detachable plates
Supplied with masking sheet to protect components from cement during plasteringSKU: 279
There are no reviews yet.