Ratings: Ampere ratings of Type A, non-fusible, knife switches are based on a temperature rise of not more than 30 degrees C. above an ambient temperature of not more than 40 degrees C. when mounted in open air. Enclosed ratings are based on the switches being mounted in enclosures with adequate ventilation and with bus or cable of appropriate size.
100Amp Knife Switch
Type A, single-throw and double-throw, non-fusible knife switches have a corrosion resistant finish, are mounted on GPO-3 bases and have high clips and hinges. The high clips and hinges simplify the front-of-board connections. Available 30 Amp thru 2000 Amp.
Fusible Type A knife switches are arranged with fuse holders which will accept standard code fuses. When mounted on a panel the single-throw switch is fusible at the bottom. Available 30 Amp through 600 Amp at 250, 480 or 600 volt.
₦6,500.00
CompareBased on 0 reviews
Be the first to review “100Amp Knife Switch”
-
SOLAR POWERED
Solar Fan With Radio
1.Rechargeable LED light:32pcs high brightness LED lamp as table lamp which can be lighting above 8 hours at high mode and 22 hours at low mode;
2.FM Radio: The machine equipped with a stereo FM radio,allow you to enjoy the airwaves to bring the fun anytime,aywhere;
3.Air Fan: a.Provide wind in hot weather.b Speed:6000rpm c.Power:2.3W,Input Current:70mA;
4.Battery:3.7V 4000mAH lithium battery;
5.Charging time:a.About 10 hours by solar panel b.About 12 hours by AC adaptor;
6.Recharge every three months if the light is not used for a long time.SKU: 1530 -
Electro, LED LIGHTS, LIGHTING, OUTDOOR LIGHTS
90W Artemis Series Flood Light
â– Aluminum alloy, high corrosion resistance and weather-resistance â– Built-in chimney effect thermal management system with self-cleaning effect and reliable performance. â– Patented removable-module design for power variation. â– Mounting bracket with marker for angle adjustment
SKU: 23 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 7 – 10amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload4
There are no reviews yet.