Fiberglass 12 ft single sided stepladder is now loaded with new advanced features. Multifunctional Holster Top PRO keeps tools organized and safe on the ladder top. A magnetic strip and hardware bins keep parts and tools easily accessible and secure. The right handed drill hammer slot and pipe channel are conveniently located for ease of use. Comfortable slip resistant steps.
12 Feet Fiberglass Ladder
ladder comes in a vertical or inclined set of rungs or steps. There are two types: rigid ladders that can be leaned against a vertical surface such as a wall, and rope ladders that are hung from the top. The vertical members of a rigid ladder are called stringers or rails (US) or stiles (UK). Rigid ladders are usually portable, but some types are permanently fixed to buildings. They are commonly made of metal, wood, or fibreglass, but they have been known to be made of tough plastic.
₦122,000.00
CompareBased on 0 reviews
Be the first to review “12 Feet Fiberglass Ladder”
-
CHANDELIER LIGHT, Electro, HOME&OFFICE LIGHTING, LIGHTING
5 Arm Light Fitting Rouen
‘-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority-
SKU: 236 -
ELECTRICAL FITTINGS, Electro, TRUNCKING
16x25mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 408 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 4-6amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload1 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
1.5mm x 4Core Armoured Cable (Kablemetal)
1.5mm 4 Core Armoured Cable is a form of electrical cable, primarily found in electrical installations such as powered devices and networks, powering outdoor features such as lighting and jacuzzis, as well as industrial installations.
4 Core Cable contains brown, black, grey & blue coloured cores. It’s construction is commonly identified as steel for the wire armour, PVC for the outer sheathing and bedding, XLPE (Cross-Linked Polyethylene) for the insulation and plain annealed stranded copper for the cores.
As the cable contains a steel wire armour, this not only provides a form of mechanical protection, but can also be used an earth for the cable.
No. of cores / size of cable – 4
Approx overall diameter – 14mm
Approx weight (m) – 0.36 Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating – 600/1000VtSKU: 7570 -
SOLAR POWERED
Solar LED Lamp
1. Solar Panel: 30W/18V with 6M cable
2. Solar panel bracket: yes
3. SMF Lead-Acid Battery: 12V 24Ah
4. Lamp: 4PCS super bright 3W LED lamp with 5M
cable
5. USB interface: USB output can charge formobile
phone, etc
6. Indicator: Charging indicator, Workingindicator,Low- voltage indicator.
7. Charging time: About 11-12hours (by
solar panel); about 15-17 hours (by
adapter).
8. Lighting time: 4PCS 3W LED 22-24 hours when the
battery is fully charged
9. AC Adapter: Input AC100-240V,output DC16V/2A, by
option
10. Support external inverter and support AC output
11. Match with 1* 8W/12V DC fan (optional)
12. Music playing function: with MP3,FM radio functionSKU: 1552
There are no reviews yet.