Each Armored cable contains high strength, good bending performance, no gel, easy to be connected and operated on with buffer design, independent strength member and sheath to prevent damage from environmental and mechanical stress. Outer jacket’s colors varies according to the types of optical fibers (indoor use), black color is recommended for outdoor use, options for other colors available upon request.
35mm 4Core Amroured Cable|Per Meter (Nigerchin Cable and Wire)
35mm 4 Core Armoured Cable is a variant of electrical cable that is commonly found within powered networks as well as supplying mains voltage to multiple powered devices etc. It is used in a wide variety of electrical applications but at this size, it is commonly found within industrial compounds such as power stations and building sites.
This cable is identified by the following method of construction;
– Plain Annealed Stranded Copper for the cores/conductors
– XLPE (Cross-Linked Polyethylene) for the insulation
– PVC (Polyvinyl Chloride) for the sheathing and bedding
– Steel Wire for the armouring that protects the insulating layers beneath.
As well as a form of mechanical protection, therefore suitable for outdoor use and underground installations, the steel wire armour also acts a CPC (Circuit Protective Conductor), meaning it acts as a natural earth for the cable therefore an earth core or seperate length of earth cable is not required.
– No. of cores / size of cable – 4
– Approx overall diameter – 28.8mm
– Approx weight (m) – 2.3Kg
– Conductors – Plain Annealed Stranded Copper
– Insulation – Cross-Linked Polyethylene
– Bedding – Polyvinyl Chloride
– Armour / Protection – Steel Wire
– Sheath / Jacket – Polyvinyl Chloride
– Application – Used within large powered networks & for providing mains electricity to multiple powered devices.
– Voltage Rating – 600/1000Vt
₦48,417.00
CompareBased on 0 reviews
Be the first to review “35mm 4Core Amroured Cable|Per Meter (Nigerchin Cable and Wire)”
-
Electro, ENERGY SAVING BULBS, LIGHT BULBS, LIGHTING
Torch B22 (Pin) 11W Energy Saving Bulb
Specifications:
• Optional wattage: 7-105W
• Operating voltage: 110 to 130V or 220 to 240V
• Frequency: 50/60Hz
• Average lifetime: 6000hrs/8000 hrs/10000hrs available
• Optional base: E27/B22/E14
• Optional Color Temperature: 2,700K/4,100K/6,500KApplications:
Shopping malls, table lamps, pendent lamps, supermarkets, restaurants, shops, hotels etc.SKU: 861 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 18 – 23amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload7 -
CIRCUIT BREAKERS, DISTRIBUTION BOARDS, Electro
ABB MCB Switch 3 POLE
Trip Free mechanism10KA short circuit breaking capacity for B and C Low power consumption,thus cost effective and energy savingFinger safe terminal IP20 degree of protectionDual Terminal Facility15 Plate Arc chute for effective arc quenchingsilver graphite contacts for enhance lifeAccessories switchPerformance and safetyPositive contact indicatorReliability and continuity of serviceSuitable for both DESB and switch boardShort Circuit breaking capacity 3KA MCBProtection against overload and short Circuit breaking capacity 3KA
SKU: 284 -
There are no reviews yet.