Each Armored cable contains high strength, good bending performance, no gel, easy to be connected and operated on with buffer design, independent strength member and sheath to prevent damage from environmental and mechanical stress. Outer jacket’s colors varies according to the types of optical fibers (indoor use), black color is recommended for outdoor use, options for other colors available upon request.
6mm x 4Core Armoured Cable Comestar
Suitable for under and over-ground usage alike, 6mm 4 Core Armoured Cable is a dust and waterproof variant of electrical cable that is commonly found within powered networks and supplying mains electricity to a large variety of devices, both domestic and industrial.
This particular type of cable is constructed using Plain Annealed Stranded Copper for the conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing and Steel Wire for the armouring.
Not only does the Steel Wire Armour provide a method of mechanical protection, meaning it is suitable for installation into highly-corrosive environments, the armour also provides a form of CPC (Circuit Protective Conductor) meaning it can be used as an earth for the cable. This means that an earth core/cable is not required although it is still recommended as an extra safety measure.
No. of cores / size of cable – 4
Approx overall diameter – 18.7mm
Approx weight (m) – 0.75Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating – 600/1000Vt
₦8,950.00
CompareBased on 0 reviews
Be the first to review “6mm x 4Core Armoured Cable Comestar”
-
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
Standard 200Amps Changeover Switch
Features:
DMC terminal blocks are provided for cable termination having excellent mechanical, thermal and dielectric properties.
Side Handle Operation.
The enclosure is made of sheet steel suitable for individual mounting.
Terminals suitable for both Al. & Cu conductors.
Adequate knockouts provided for entry of cables.
Door interlocking facility provided.
mounting holes for switch ratings upto 320A and mounting brackets
for switch rating of 400A and above.SKU: Standard200 -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Powertec 4 Way 100A Three Phase(TPN) Distribution Board C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroPowertec 4 Way 100A Three Phase(TPN) Distribution Board C/W MCB
Features
Compact DBs which occupy minimum space
Raised neutral link for easy wiring
Suitable for surface & fush mounting
Detachable din bar with end stoppers for easy assembly of breakers
Supplied with fully shielded bus-bars
Level marks for providing indication for fitment in wall
Supplied with neutral & earth link, top & bottom detachable plates
Supplied with masking sheet to protect components from cement during plasteringSKU: 279 -
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGS, FLUORESENT TUBES, INDOOR LIGHTS, LIGHT BULBS, LIGHTING
Warom Explosion Proof Corrosion Proof Fluorescent Lamp 4ft Double (LED type)
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGS, FLUORESENT TUBES, INDOOR LIGHTS, LIGHT BULBS, LIGHTINGWarom Explosion Proof Corrosion Proof Fluorescent Lamp 4ft Double (LED type)
Widely used for the illumination of various marine platforms, chemical tankers, LNG ships and hazardous cargo wharf etc.
Can reliably work in severe environment exposed to moisture, vibration or corrosion;
Explosive hazardous atmosphere Zone 1, Zone 2, Zone 21 and Zone 22
Explosion -proof electronic ballast, wide voltage input
SKU: Explosion Proof Corrosion Proof-1 -
Electro, GEAR SWITCHES, GEAR SWITCHES & CHANGEOVER
Stanley SwitchGear – Side Handle 300Amp
Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. Our new range products in sheet metal Side Handle Operating Switchgear are made as per industrial requirements with powder coating. This certificate of “Stanley” original products, issued with the assurance as the same has been manufactured in accordance with requirement of IEC-60947-3 (2005-06). Quality system, standards and mechanism has been tested satisfactory to the specific test as follows: 1. Dielectric Test 2. Mechanical Operation Test 3. High Voltage Test 4. Insulation Resistance Test 5. Temperature Rise Test 6. Mini Volt Drop Test STANLEY 200A Gear Switch
SKU: StanleyGear4
There are no reviews yet.