Each Armored cable contains high strength, good bending performance, no gel, easy to be connected and operated on with buffer design, independent strength member and sheath to prevent damage from environmental and mechanical stress. Outer jacket’s colors varies according to the types of optical fibers (indoor use), black color is recommended for outdoor use, options for other colors available upon request.
70mm x 4Core Amroured Cable (Nigerchin Cable and Wire)
70mm 4 Core Armoured Cable is a size and type of steel wire armoured cable. Primarily found in large powered networks and underneath roadways supplying mains electricity to large buildings. It can also be found within the transport industry, specifically railways powering the trains and buildings located beside the tracks. Due to the size of this cable, it is perfectly suitable for large amounts of power running through it on a daily basis, 24 hours a day.
The best solution to this issue would be to buy a length of earth cable that matches the length of the Armoured Cable. This would negate the steel wire from being used as an earth, meaning it is a safer alternative.
70mm 4 Core Armoured Cable is constructed from the following materials;
– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
No. of cores / size of cable – 4
Approx overall diameter – 36.8mm
Approx weight (m) – 4.23Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel Wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Primarily found in large powered networks as well as buried underneath roads supplying mains electricity to large buildings etc.
Voltage Rating – 600/1000Vt
₦76,500.00
CompareBased on 0 reviews
Be the first to review “70mm x 4Core Amroured Cable (Nigerchin Cable and Wire)”
-
ELECTRICAL INDUSTRIAL, TRANSFORMER
ABB Transformer 300KVA 11/400KV
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: 300KV
- Typical fluid: mineral oil
SKU: DTS30011 -
CHANDELIER LIGHT, Electro, HOME&OFFICE LIGHTING, LIGHTING
Marie Therese Chandelier Black 5 Arm
‘-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority-
SKU: 226 -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Havells 4 Way 100A Three Phase(TPN) Distribution Board C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroHavells 4 Way 100A Three Phase(TPN) Distribution Board C/W MCB
Features Compact DBs which occupy minimum space Raised neutral link for easy wiring Suitable for surface & fush mounting Detachable din bar with end stoppers for easy assembly of breakers Supplied with fully shielded bus-bars Level marks for providing indication for fitment in wall Supplied with neutral & earth link, top & bottom detachable plates Supplied with masking sheet to protect components from cement during plastering
SKU: 274 -
ENERGY SAVING BULBS, FLUORESENT TUBES, LIGHT BULBS, LIGHTING
Compact fluorescent lamp lamp Sylvania the CF D 13W/G24d – 1/840
ENERGY SAVING BULBS, FLUORESENT TUBES, LIGHT BULBS, LIGHTINGCompact fluorescent lamp lamp Sylvania the CF D 13W/G24d – 1/840
PRODUCT FEATURES
– Compact and high performance double bend 2-bend pin lamp,
– Suitable for operation on elecronic control gear (DE type) and magnetic ballast (D version),
– Dimmable with suitable dimmer,
– Excellent colour rendering,
– Suitable for emergency lightingWatt (Rated) (W) – 13watt
General application – Education, Hospitality, Logistics & Industry, Museums & Galleries, Office, Retail, Residential & ConsumerSKU: LYNX-D
There are no reviews yet.